Publications
- Microstructural characterization of molybdenum grain boundaries by micropillar compression testing and atom probe tomography [Mikrostrukturelle Charakterisierung von Molybdän-Korngrenzen mittels Mikrosäulen-Druckversuchen und Atomsondenuntersuchungen] (Artikel)
Jakob S., Lorich A., Eidenberger-Schober M., Knabl W., Clemens H., Maier-Kiener V.
Praktische Metallographie/Practical Metallography (2019)
Externer Link:Link - Combination of Nanoindentation and Microscopy for the Examination of Aluminum Alloys in Coarse- A nd Ultrafine-Grained Condition [Kombination von Nanoindentation und Mikro-skopie zur Untersuchung von Aluminium-Legierungen im grob-und ultrafeinkörnigen Zustand] (Artikel)
Kappacher J., Leitner A., Clemens H., Maier-Kiener V.
Praktische Metallographie/Practical Metallography (2019)
Externer Link:Link - Beryllium - A challenge for preparation and mechanical characterization [Beryllium - eine Herausforderung für Präparation und mechanische Charakterisierung] (Artikel)
Siller M., Kappacher J., Rolli R., Clemens H., Maier-Kiener V.
Praktische Metallographie/Practical Metallography (2019)
Externer Link:Link - Structure function analysis of temperature-dependent thermal properties of Nm-thin Nb 2 O 5 (Artikel)
Mitterhuber L., Kraker E., Defregger S.
Energies (2019)
Externer Link:Link - Mechanosynthesis of the whole Y1-xBixMn1-xFexO3 perovskite system: Structural characterization and study of phase transitions (Artikel)
Quintana-Cilleruelo J.Á., Veerapandiyan V.K., Deluca M., Algueró M., Castro A.
Materials (2019)
Externer Link:Link - To the design of highly fracture-resistant composites by the application of the yield stress inhomogeneity effect (Artikel)
Sistaninia, M. and Kasberger, R. and Kolednik, O.
Composite Structures (2018)
Externer Link:Link - The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys (Artikel)
Appel, F. and Paul, D.H.J. and Staron, P. and Oehring, M. and Kolednik, O. and Predan, J. and Fischer F.D.
Materials Science & Engineering A (2018)
Externer Link:Link - Thermal transient measurement and modelling of a power cycled flip-chip LED module (Artikel)
Mitterhuber, L. and Defregger, S. and Magnien, J. and Rosc, J. and Hammer, R. and Goullon, L. and Hutter, M. and Schrank, F. and Hörth, S. and Kraker, E.
Microelectronics Reliability (2018)
Externer Link:Link - Point defects at the Sigma 5(012)[100] grain boundary in TiN and the early stages of Cu diffusion: An ab initio study (Artikel)
Popov, M. and Bochkarev, A. and Razumovskiy, V.I. and Puschnig, P. and Spitaler, J.
Acta Materialia (2018)
Externer Link:Link - Solute segregation in Cu: DFT vs. Experiment (Artikel)
Razumovskiy, V.I. and Divinski, S.V. and Romaner, L.
Acta Materialia (2018)
Externer Link:Link - Matching in-situ and ex-situ recorded stress gradients in an AlxGa1-xN Heterostructure: Complementary wafer curvature analyses in time and space (Artikel)
Reisinger, M. and Ostermaier, C. and Tomberger, M. and Zechner, J. and Sartory, B. and Ecker, W. and Daumiller, I. and Keckes, J.
Scripta Materialia (2018)
Externer Link:Link - Tensile stresses in fine blanking tools and their relevance to tool fracture behavior (Artikel)
Krobath, M. and Klünsner, T. and Ecker, W. and Deller, M. and Leitner, N. and Marsoner, S.
International Journal of Machine Tools and Manufacture (2018)
Externer Link:Link - A modelling framework for the simulation of lubricated and dry line contacts (Artikel)
Moder, J. and Grün, F. and Godor, I.
Tribology International (2018)
Externer Link:Link - Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings (Artikel)
Tkadletz, M. and Schalk, N. and Mitterer, C. and Keckes, J. and Pohler, M. and Czettl, C.
International Journal of Refractory Metals & Hard Materials (2018)
Externer Link:Link - Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes (Artikel)
M. Dios, I. Kraleva, Z. González, P. Alvaredo, B. Ferrari, E. Gordo, R. Bermejo
Journal of Alloys and Compounds (2018)
Externer Link:Link - Fracture toughness of silicon nitride balls via thermal shock (Artikel)
Strobl S, Adlmann F-A, Supancic P, Lube T, Danzer R, Schöppl O.
Journal of the European Ceramic Society (2018)
Externer Link:Link - How grain boundary chemistry controls the fracture mode of molybdenum (Artikel)
K. Leitner, D. Scheiber, S. Jakob, S. Primig, H. Clemens, E. Povoden-Karadeniz, L. Romaner
Materials & Design (2018)
Externer Link:Link - Comparing fast inductive tempering and conventional tempering: Effects on microstructure and mechanical properties (Artikel)
Annika Eggbauer, Gerald Ressel, Peter Raninger, Petri Prevedel, Stefan Marsoner, Reinhold Ebner
Metallurgical Research & Technology (2018)
Externer Link:Link - Advanced measures to characterize mechanical properties of Refractories (Artikel)
Jin S., Harmuth H., Gruber D., Sidi Mammar A.
China’s refractories (2018)
Externer Link:Link - Advanced creep testing of refractories providing new insight into material behavior (Artikel)
Jin S., Harmuth H., Gruber D. , Schachner S., Meunier P., Techer R.
Refractories Worldforum (2018)
Externer Link:Link