Publications
- A wheel passing a crossing nose: Dynamic analysis under high axle loads using finite element modelling (Artikel)
Pletz, M. and Daves, W. and Ossberger, H.
Journal of Rail and Rapid Transit (2012)
Externer Link:Link - Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contact (Artikel)
Pondicherry, K. and Grün, F. and Godor, I. and Bertram, R. and Offenbecher, M.
Lubrication Science (2012)
Externer Link:Link - The TiO2(100)/(0001)Al2O3 interface: A first-principles study supported by experiment (Artikel)
Popov, M. and Spitaler, J. and Mühlbacher, M. and Walter, C. and Keckes, J. and Mitterer, C. and Ambrosch-Draxl, C.
Physical Review B (2012)
Externer Link:Link - Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels (Artikel)
Presoly, P. and Pierer, R. and Bernhard, C.
Materials Science and Engineering (2012)
Externer Link:Link - Synthesis and characterization of electrodeposited hierarchical nanodendritic NiCoFe alloy powders (Artikel)
Rafailovic, L.D. and Gammer, C. and Kleber, C. and Rentenberger, C. and Angerer, P. and Karnthaler, H.P.
Journal of Alloys and Compounds (2012)
Externer Link:Link - Stacking-fault energy and anti-Invar effect in FeMn alloys from first principles (Artikel)
Reyes-Huamantinco, A. and Puschnig, P. and Ambrosch-Draxl, C. and Peil, O. and Ruban, A.
Physical Review B (2012)
Externer Link:Link - A novel approach for determining fracture toughness of hard coatings on the micrometer scale (Artikel)
Riedl, A. and Daniel, R. and Stefenelli, M. and Schöberl, T. and Kolednik, O. and Mitterer, C. and Keckes, J.
Scripta Materialia (2012)
Externer Link:Link - Particle strengthening in fcc crystals with prolate and oblate precipitates (Artikel)
Sonderegger, B. and Kozeschnik, E.
Scripta Materialia (2012)
Externer Link:Link - Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems (Artikel)
Sonderegger, B. and Kozeschnik, E. and Sommitsch, C.
Materials Science Forum (2012)
Externer Link:Link - Surface crack in tension or in bending - A reassessment of the Newman and Raju formula in respect to fracture toughness measurements in brittle materials (Artikel)
Strobl, S. and Supancic, P. and Lube, T. and Danzer, R.
Journal of the European Ceramic Society (2012)
Externer Link:Link - Toughness measurement on ball specimens. Part I: Theoretical analysis (Artikel)
Strobl, S. and Supancic, P. and Lube, T. and Danzer, R.
Journal of the European Ceramic Society (2012)
Externer Link:Link - Exact implementation of subcritical crack growth into a Weibullian strength distribution under constant stress rate conditions (Artikel)
Supancic, P. and Schöpf, H.
Journal of the European Ceramic Society (2012)
Externer Link:Link - Modelling for hydrogen diffusion in metals with traps revisited (Artikel)
Svoboda, J. and Fischer, F.D.
Acta Materialia (2012)
Externer Link:Link - Modeling the role of sources and sinks for vacancies on the kinetics of diffusive phase transformation in binary systems with several stoichiometric phases (Artikel)
Svoboda, J. and Fischer, F.D. and Abart, R.
Philosophical Magazine Letters (2012)
Externer Link:Link - Derivation of the phase field equations from the thermodynamic extremal principle (Artikel)
Svoboda, J. and Fischer, F.D. and McDowell, D.L.
Acta Materialia (2012)
Externer Link:Link - Atomistic and continuums modeling of cluster migration and coagulation in precipitation reactions (Artikel)
Warczok, P. and Zenisek, J. and Kozeschnik, E.
Computational Materials Science (2012)
Externer Link:Link - Duplex processing for increased adhesion of sputter deposited Ti1-xAlxN coatings on a Fe-25%Co-15%Mo tool material (Artikel)
Weirather, T. and Fian, A. and Sartory, B. and Caliskanoglu, D. and Kölker, W. and Mitterer, C.
Surface and Coatings Technology (2012)
Externer Link:Link - Yield stress influenced by the ratio of wire diameter to grain size - A competition between the effects of specimen microstructure and dimension in micro-sized polycrystalline copper wires (Artikel)
Yang, B. and Motz, C. and Rester, M. and Dehm, G.
Philosophical Magazine (2012)
Externer Link:Link - Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature (Artikel)
Cha, L. and Clemens, H. and Dehm, G.
International Journal of Materials Research (2011)
Externer Link:Link - In-situ TEM heating study of the gamma lamellae formation inside the alpha2 matrix of a Ti-45Al-7.5Nb alloy (Artikel)
Cha, L. and Clemens, H. and Dehm, G. and Zhang, Z.
Advanced Materials Research (2011)
Externer Link:Link