Publications




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • On configurational forces at boundaries in fracture mechanics (Artikel)
    Fischer, F.D. and Simha, N.K. and Predan, J. and Schöngrundner, R. and Kolednik, O.
    International Journal of Fracture (2012)
    Externer Link:Link
  • Modelling the kinetics of a triple junction (Artikel)
    Fischer, F.D. and Svoboda, J. and Hackl, K.
    Acta Materialia (2012)
    Externer Link:Link
  • A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings (Artikel)
    Fischlschweiger, M. and Cailletaud, G. and Antretter, T.
    International Journal of Plasticity (2012)
    Externer Link:Link
  • Verification of a continuum mechanical explanation of plasticity-induced crack closure under plain strain conditions by means of finite element analysis (Artikel)
    Fischlschweiger, M. and Ecker, W. and Pippan, R.
    Engineering Fracture Mechanics (2012)
    Externer Link:Link
  • Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia-spinel refractories (Artikel)
    Grasset-Bourdel, R. and Alzina, A. and Huger, M. and Chotard, T. and Gruber, D. and Harmuth, H.
    Journal of the European Ceramic Society (2012)
    Externer Link:Link
  • Numerical simulation of crack growth in polyethylene composites by means of the cohesive zone model (Artikel)
    Janko, M. and Ecker, W. and Pinter, G. and Kolednik, O.
    Macromolecular Symposia (2012)
    Externer Link:Link
  • X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films (Artikel)
    Keckes, J. and Bartosik, M. and Daniel, R. and Mitterer, C. and Maier, G. and Ecker, W. and Vila-Comamala, David, C. and Schoeder, S. and Burghammer, M.
    Scripta Materialia (2012)
    Externer Link:Link
  • The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength (Artikel)
    Lube, T. and Witschnig, S. and Supancic, P. and Danzer, R. and Schöppl, O.
    Fractography of Glasses and Ceramics VI (2012)
    Externer Link:Link
  • A wheel set / crossing model regarding impact, sliding and deformation - Explicit finite element approach (Artikel)
    Pletz, M. and Daves, W. and Ossberger, H.
    Wear (2012)
    Externer Link:Link
  • A wheel passing a crossing nose: Dynamic analysis under high axle loads using finite element modelling (Artikel)
    Pletz, M. and Daves, W. and Ossberger, H.
    Journal of Rail and Rapid Transit (2012)
    Externer Link:Link
  • Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contact (Artikel)
    Pondicherry, K. and Grün, F. and Godor, I. and Bertram, R. and Offenbecher, M.
    Lubrication Science (2012)
    Externer Link:Link
  • The TiO2(100)/(0001)Al2O3 interface: A first-principles study supported by experiment (Artikel)
    Popov, M. and Spitaler, J. and Mühlbacher, M. and Walter, C. and Keckes, J. and Mitterer, C. and Ambrosch-Draxl, C.
    Physical Review B (2012)
    Externer Link:Link
  • A novel approach for determining fracture toughness of hard coatings on the micrometer scale (Artikel)
    Riedl, A. and Daniel, R. and Stefenelli, M. and Schöberl, T. and Kolednik, O. and Mitterer, C. and Keckes, J.
    Scripta Materialia (2012)
    Externer Link:Link
  • Particle strengthening in fcc crystals with prolate and oblate precipitates (Artikel)
    Sonderegger, B. and Kozeschnik, E.
    Scripta Materialia (2012)
    Externer Link:Link
  • Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems (Artikel)
    Sonderegger, B. and Kozeschnik, E. and Sommitsch, C.
    Materials Science Forum (2012)
    Externer Link:Link
  • Surface crack in tension or in bending - A reassessment of the Newman and Raju formula in respect to fracture toughness measurements in brittle materials (Artikel)
    Strobl, S. and Supancic, P. and Lube, T. and Danzer, R.
    Journal of the European Ceramic Society (2012)
    Externer Link:Link
  • Toughness measurement on ball specimens. Part I: Theoretical analysis (Artikel)
    Strobl, S. and Supancic, P. and Lube, T. and Danzer, R.
    Journal of the European Ceramic Society (2012)
    Externer Link:Link
  • Exact implementation of subcritical crack growth into a Weibullian strength distribution under constant stress rate conditions (Artikel)
    Supancic, P. and Schöpf, H.
    Journal of the European Ceramic Society (2012)
    Externer Link:Link
  • Modeling the role of sources and sinks for vacancies on the kinetics of diffusive phase transformation in binary systems with several stoichiometric phases (Artikel)
    Svoboda, J. and Fischer, F.D. and Abart, R.
    Philosophical Magazine Letters (2012)
    Externer Link:Link
  • Derivation of the phase field equations from the thermodynamic extremal principle (Artikel)
    Svoboda, J. and Fischer, F.D. and McDowell, D.L.
    Acta Materialia (2012)
    Externer Link:Link
33 34 35 36 37 38 39 40 41 42 43