Publikationen
- Comparing fast inductive tempering and conventional tempering: Effects on microstructure and mechanical properties (Artikel)
Annika Eggbauer, Gerald Ressel, Peter Raninger, Petri Prevedel, Stefan Marsoner, Reinhold Ebner
Metallurgical Research & Technology (2018)
Externer Link:Link - FE temperature- and residual stress prediction in milling inserts and correlation with experimentally observed damage mechanisms (Artikel)
Nemetz A., Daves W., Klünsner T., Ecker W., Teppernegg T., Czettl C., Krajinović I.
Journal of Materials Processing Technology (2018)
Externer Link:Link - 30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film (Artikel)
Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M., Mitterer, C., Niese, S., Kubec, A.
Acta Materialia (2018)
Externer Link:Link - A new device for high-temperature in situ GISAXS measurements (Artikel)
Gerhard Fritz-Popovski, Sabine C. Bodner, Florentyna Sosada-Ludwikowska, Günther A. Maier, Roland Morak, Livia Chitu, Lutz Bruegemann, Joachim Lange, Hans-Georg Krane and Oskar Paris
Review of Scientific Instruments (2018)
Externer Link:Link - Advanced measures to characterize mechanical properties of Refractories (Artikel)
Jin S., Harmuth H., Gruber D., Sidi Mammar A.
China’s refractories (2018)
Externer Link:Link - Advanced creep testing of refractories providing new insight into material behavior (Artikel)
Jin S., Harmuth H., Gruber D. , Schachner S., Meunier P., Techer R.
Refractories Worldforum (2018)
Externer Link:Link - Parameter driven monitoring for a flip-chip LED module under power cycling condition (Artikel)
J. Magnien, L. Mitterhuber, J. Rosc, F. Schrank, S. Hörth, M. Hutter, S. Defregger, E. Kraker
Microelectronics Reliability (2018)
Externer Link:Link - Induction Thermography for Surface Crack Detection and Depth Determination (Artikel)
Oswald-Tranta, B.
Applied Sciences (2018)
Externer Link:Link - Modern Methods for the Microscopic Characterization of ZnO Varistor Grain Boudaries (Artikel)
Raidl N, Sartory B, Supancic P, Danzer R.
Practical Metallography (2018)
Externer Link:Link - Configurational thermodynamics of C in body-centered cubic/tetragonal Fe: A combined computational study (Artikel)
J.-Y. Yan and A. Ruban
Computational Materials Science (2018)
Externer Link:Link - Influence of accounting for translational motion of grains on grain growth kinetics and size distribution (Artikel)
J. Svoboda, F.D. Fischer
Scripta Materialia (2018)
Externer Link:Link - Elastic stress–strain analysis of an infinite cylindrical inclusion with eigenstrain (Artikel)
J. Svoboda, G. A. Zickler, F. D. Fischer
Arch Appl Mech (2018)
Externer Link:Link - An innovative concept for interstitial diffusion in stressed crystals (Artikel)
J. Svoboda, G. A. Zickler, F. D. Fischer
Int J Solids Struct (2018)
Externer Link:Link - Dependence of fracture strain on flaw size in rail switches - Experiments and theoretical modelling (Artikel)
Stefan Kolitsch, Hans-Peter Gänser, Reinhard Pippan
Engineering Failure Analysis (2018)
Externer Link:Link - Experimental and numerical investigations of the gamma '' and gamma ' precipitation kinetics in Alloy 718 (Artikel)
A. Drexler, B. Oberwinkler, S. Primig, C. Turk, E. Povoden-Karadeniz, A. Heinemann, W. Ecker, M. Stockinger
Materials Science and Engineering A (2018)
Externer Link:Link - In-situ crack propagation measurement of high-strength steels including overload effects (Artikel)
David Simunek, Martin Leitner, Florian Grün
Procedia Engineering (2018)
Externer Link:Link - Remarkable impact of low BiYbO3 doping levels on the local structure and phase transitions of BaTiO3 (Artikel)
Deluca, M. and Al-Jlaihawi, Z. G. and Reichmann, K. and Bell, A.N.T. and Feteira, A.
Journal of Materials Chemistry A (2018)
Externer Link:Link - In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing (Artikel)
M. Alfreider, D. Kozic, O. Kolednik, D. Kiener
Materials & Design (2018)
Externer Link:Link - Structure-property correlations and origin of relaxor behaviour in BaCexTi(1-x)O(3) (Artikel)
Giovanna Canu, Giorgia Confalonieri, Marco Deluca, Lavinia Curecheriu, Maria Teresa Buscaglia, Mihai Asandulesa, Nadejda Horchidan, Monica Dapiaggi, Liliana Mitoseriu, Vincenzo Buscaglia
Acta Materialia (2018)
Externer Link:Link - Prediction of porosity characteristics of aluminium castings based on X-ray CT measurements (Artikel)
Christian Garb, Martin Leitner, Markus Tauscher, Moritz Weidt and Roland Brunner
International Journal of Cast Metals Research (2018)
Externer Link:Link