Publications
- A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples (Artikel)
Kiener, D. and Grosinger, W. and Dehm, G. and Pippan, R.
Acta Materialia (2008)
Externer Link:Link - Fracture analysis of annealed PVDF films (Artikel)
Wallner, G.M. and Major, Z. and Maier, G.A. and Lang, R. W.
Polymer Testing (2008)
Externer Link:Link - Prediction of the fracture toughness of a ceramic multilayer composite - Modeling and experiments (Artikel)
Chen, C.R. and Pascual, J. and Fischer, F.D. and Kolednik, O. and Danzer, R.
Acta Materialia (2007)
Externer Link:Link - The ball on three balls test - Strength and failure analysis of different materials (Artikel)
Danzer, R. and Harrer, W. and Supancic, P. and Lube, T. and Wang, Z. and Börger, A.
Journal of the European Ceramic Society (2007)
Externer Link:Link - On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation (Artikel)
Rüf, G. and Sommitsch, C. and Buchmayr, B.
International Journal of Materials Research (2007)
Externer Link:Link - Application of material forces to fracture of inhomogeneous materials: Illustrative examples (Artikel)
Fischer, F.D. and Predan, J. and Kolednik, O. and Simha, N.K.
Archive of Applied Mechanics (2007)
Externer Link:Link - A note on the principle of maximum dissipation rate (Artikel)
Fischer, F.D. and Svoboda, J.
Journal of Applied Mechanics (2007)
Externer Link:Link - Hindered crack propagation in materials with periodically varying young's modulus - Lessons from biological materials (Artikel)
Fratzl, P. and Gupta, H.S. and Fischer, F.D. and Kolednik, O.
Advanced Materials Research (2007)
Externer Link:Link - Kinetics of the austenite-to-ferrite phase transformation - From the intrinsic to an effective interface mobility (Artikel)
Gamsjäger, E.
Materials Science Forum (2007)
Externer Link:Link - A note on the contact conditions at migrating interfaces (Artikel)
Gamsjäger, E.
Acta Materialia (2007)
Externer Link:Link - Kinetics of solute driven melting and solidification (Artikel)
Gamsjäger, E. and Svoboda, J. and Fischer, F.D. and Rettenmayr, M.
Acta Materialia (2007)
Externer Link:Link - Thermal stability of nanocomposite CrC/a-C:H thin films (Artikel)
Gassner, G. and Mayrhofer, P.H. and Patscheider, J. and Mitterer, C.
Thin Solid Films (2007)
Externer Link:Link - Tribological properties of nanocomposite CrCx/a-C:H thin films (Artikel)
Gassner, G. and Patscheider, J. and Mayrhofer, P.H. and Sturm, S. and Scheu, C. and Mitterer, C.
Tribology Letters (2007)
Externer Link:Link - A new approach to modelling of non-steady grain growth (Artikel)
Svoboda, J. and Fischer, F.D.
Acta Materialia (2007)
Externer Link:Link - Single-crystal growth of NaCl-structure Al-Cr-N thin films on MgO(0 0 1) by magnetron sputter epitaxy (Artikel)
Willmann, H. and Beckers, H. and Giuliani, F. and Birch, J. and Mayrhofer, P.H. and Mitterer, C. and Hultman, L.
Scripta Materialia (2007)
Externer Link:Link - On the potential for improving equilibrium thermodynamic databases with kinetic simulations (Artikel)
Kozeschnik, E. and Holzer, I. and Sonderegger, B.
Journal of Phase Equilibria and Diffusion (2007)
Externer Link:Link - Industrially-scaled room-temperature pulsed laser deposition of Ti-TiN multilayer coatings (Artikel)
Lackner, J.M.
Journal of Physics (2007)
Externer Link:Link - Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD) (Artikel)
Major, L. and Morgiel, J. and Major, B. and Lackner, L.M. and Waldhauser, W. and Ebner, R. and Nistor, L. and Van Tendeloo, G.
Surface and Coatings Technology (2006)
Externer Link:Link - Rapid determination of stress factors and absolute residual stresses in thin films (Artikel)
Martinschitz, K.J. and Eiper, E. and Massl, S. and Köstenbauer, H. and Daniel, R. and Fontalvo, G. and Mitterer, C. and Keckes, J.
Journal of Applied Crystallography (2006)
Externer Link:Link - Characterization of wear and surface reaction layer formation on aerospace bearing steel M50 and a nitrogen-alloyed stainless steel (Artikel)
Peissl, S. and Leitner, H. and Ebner, R. and Hutter, H. and Krecar, D. and Rabitsch, R.
Journal of ASTM International (2006)
Externer Link:Link