Publications




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Thermal stability, microstructure and mechanical properties of Ti1-xZrxN thin films (Artikel)
    Hoerling, A. and Sjölen, J. and Willmann, H. and Larsson, T. and Oden, M. and Hultman, L.
    Thin Solid Films (2008)
    Externer Link:Link
  • Predicted precipitate back-stress and creep rupture strength of the advanced 9-12 % Cr steel COST E2 (Artikel)
    Holzer, I. and Kozeschnik, E.
    International Journal of Materials Research (2008)
    Externer Link:Link
  • Thermodynamic extremal principle and its application to dufour and soret effects and plasticity (Artikel)
    Svoboda, J. and Fischer, F.D. and Vala, J.
    Physical, Mathematical, and Natural Sciences (2008)
    Externer Link:Link
  • Damage mechanisms in materials for cold forging dies under loading conditions typical for dies (Artikel)
    Jesner, G. and Marsoner, S. and Schemmel, I. and Häussler, K. and Ebner, R. and Pippan, R.
    International Journal of Microstructure and Materials Properties (2008)
    Externer Link:Link
  • A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples (Artikel)
    Kiener, D. and Grosinger, W. and Dehm, G. and Pippan, R.
    Acta Materialia (2008)
    Externer Link:Link
  • Dislocation-induced crystal rotations in micro-compressed single crystal copper columns (Artikel)
    Kiener, D. and Motz, C. and Dehm, G.
    Journal of Materials Science (2008)
    Externer Link:Link
  • The effect of deposition temperature on microstructure and properties of thermal CVD TiN coatings (Artikel)
    Wagner, J. and Mitterer, C. and Penoy, M. and Michotte, C. and Wallgram, W. and Kathrein, M.
    International Journal of Refractory Metals and Hard Materials (2008)
    Externer Link:Link
  • Fracture analysis of annealed PVDF films (Artikel)
    Wallner, G.M. and Major, Z. and Maier, G.A. and Lang, R. W.
    Polymer Testing (2008)
    Externer Link:Link
  • Deformation and damage of a crossing nose due to wheel passages (Artikel)
    Wiest, M. and Daves, W. and Fischer, F.D. and Ossberger, H.
    Wear (2008)
    Externer Link:Link
  • Assessment of methods for calculating contact pressure in wheel-rail/switch contact (Artikel)
    Wiest, M. and Kassa, E. and Daves, W. and Nielsen, J.C.O. and Ossberger, H.
    Wear (2008)
    Externer Link:Link
  • Tensile behaviour of micro-sized copper wires studied using a novel fibre tensile module (Artikel)
    Yang, B. and Motz, C. and Grosinger, W. and Kammrath, W. and Dehm, G.
    International Journal of Materials Research (2008)
    Externer Link:Link
  • Strain effects on the coarsening and softening of electrodeposited nanocrystalline Ni subjected to high pressure torsion (Artikel)
    Yang, B. and Vehoff, H. and Hohenwarter, A. and Hafok, M. and Pippan, R.
    Scripta Materialia (2008)
    Externer Link:Link
  • Thermal stability of superhard Ti-B-N coatings (Artikel)
    Mayrhofer, P.H. and Stoiber, M.
    Surface and Coatings Technology (2007)
    Externer Link:Link
  • Prediction of the fracture toughness of a ceramic multilayer composite - Modeling and experiments (Artikel)
    Chen, C.R. and Pascual, J. and Fischer, F.D. and Kolednik, O. and Danzer, R.
    Acta Materialia (2007)
    Externer Link:Link
  • The ball on three balls test - Strength and failure analysis of different materials (Artikel)
    Danzer, R. and Harrer, W. and Supancic, P. and Lube, T. and Wang, Z. and Börger, A.
    Journal of the European Ceramic Society (2007)
    Externer Link:Link
  • The influence of bias voltage on structure and mechanical/tribological properties of arc evaporated Ti-Al-V-N coatings (Artikel)
    Pfeiler, M. and Kutschej, K. and Penoy, M. and Michotte, C. and Mitterer, C. and Kathrein, M.
    Surface and Coatings Technology (2007)
    Externer Link:Link
  • On the local variation of the crack driving force in a double mismatched weld (Artikel)
    Predan, J. and Gubeljak, N. and Kolednik, O.
    Engineering Fracture Mechanics (2007)
    Externer Link:Link
  • Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies (Artikel)
    Ecker, W. and Antretter, T. and Ebner, R.
    Key Engineering Materials (2007)
    Externer Link:Link
  • Fracture toughness investigations of tungsten alloys and SPD tungsten alloys (Artikel)
    Faleschini, M. and Kreuzer, H. and Kiener, D. and Pippan, R.
    Journal of Nuclear Materials (2007)
    Externer Link:Link
  • On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation (Artikel)
    Rüf, G. and Sommitsch, C. and Buchmayr, B.
    International Journal of Materials Research (2007)
    Externer Link:Link
71 72 73 74 75 76 77 78 79 80 81