Publications
- Laser-assisted metal spinning for an efficient and flexible processing of challenging materials (Artikel)
Brummer, C. and Eck, S. and Marsoner, S. and Arntz, K. and Klocke, F.
Materials Science and Engineering (2016)
Externer Link:Link - Automatic optimization of localized heat treatment for Al-Si-Mg alloys (Artikel)
Holzmann, T. and Ludwig, A.
Materials Science and Engineering (2016)
Externer Link:Link - Induction hardening: Differences to a conventional heat treatment process and optimization of its parameters (Artikel)
Vieweg, A. and Ressel, G. and Prevedel, P. and Raninger, P. and Panzenböck, M. and Marsoner, S. and Ebner, R.
Materials Science and Engineering (2016)
Externer Link:Link - Characterization of the effect of cryogenic treatment on the tempering behavior of a secondary hardening high Co-Ni steel (Artikel)
Gruber, M. and Ressel, G. and Ploberger, S. and Marsoner, S. and Ebner, R .
Materials Science and Engineering (2016)
Externer Link:Link - Modeling of variant-interaction during bainitic phase transformation (Artikel)
Ehlenbröker, U. and Mahnken. R. and Petersmann, M. and Antretter, T.
Materials Science and Engineering (2016)
Externer Link:Link - Fatigue crack growth threshold as a design criterion - Statistical scatter and load ratio in the Kitagawa-Takahashi diagram (Artikel)
Kolitsch, S. and Gänser, H.P. and Maierhofer, J. and Pippan, R.
Materials Science and Engineering (2016)
Externer Link:Link - Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach (Artikel)
Presoly, P. and Six, J. and Bernhard, C.
Materials Science and Engineering (2016)
Externer Link:Link - Thermal stability of residual stresses in Ti-6Al-4V components (Artikel)
Stanojevic, A. and Angerer, P. and Oberwinkler, B.
Materials Science and Engineering (2016)
Externer Link:Link - Mechanical properties of low-alloy-steels with bainitic microstructures and varying carbon content (Artikel)
Weber, A. and Klarner, J. and Vogl, T. and Schöngrundner, R. and Sam, G. and Buchmayr, B.
Materials Science and Engineering (2016)
Externer Link:Link - Investigation of metallurgical phenomena related to process and product development by means of High Temperature Confocal Scanning Laser Microscopy (Artikel)
Dieguez Salgado, U. and Michelic, S. and Bernhard, C.
Materials Science and Engineering (2016)
Externer Link:Link - Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers (Artikel)
Daniel, R. and Meindlhumer, M. and Zalesak, J. and Sartory, B. and Zeilinger, A. and Mitterer, C. and Keckes, J.
Materials and Design (2016)
Externer Link:Link - Fatigue life equality of polished and electrical discharge machined WC-Co hard metal achieved solely by wet blasting (Artikel)
Klünsner, T. and Morstein, M. and Marsoner, S. and Deller, M. and Marklein, B.
International Journal of Refractory Metals and Hard Materials (2016)
Externer Link:Link - Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction (Artikel)
Reisinger, M. and Zalesak, J. and Daniel, R. and Tomberger, M. and Weiss, J.K. and Darbal, A.D. and Petrenec, M. and Zechner, J. and Daumiller, I. and Ecker, W. and Sartory, B. and Keckes, J.
Materials and Design (2016)
Externer Link:Link - In-situ observation of cross-sectional microstructural changes and stress distributions in fracturing TiN thin film during indentation (Artikel)
Zeilinger, A. and Todt, J. and Krywaka, C. and Müller, M. and Ecker, W. and Sartory, B. and Meindlhumer, M. and Stefenelli, M. and Daniel, R. and Mitterer, C. and Keckes, J.
Scientific Reports (2016)
Externer Link:Link - Evaluation of mechanical strength of miniaturized functional substrates and components in different environments (Artikel)
Bermejo, R. and Krautgasser, C. and Deluca, M. and Pletz, M. and Supancic, P. and Aldrian, F. and Danzer, R.
Journal of Microelectronics and Electronic Packaging (2016)
Externer Link:Link - Subcritical crack growth in multilayer low temperature co-fired ceramics designed with surface compressive stresses (Artikel)
Krautgasser, C. and Danzer, R. and Deluca, M. and Supancic, P. and Aldrian, F. and Bermejo, R.
Journal of the European Ceramic Society (2016)
Externer Link:Link - Thermal shock resistance of magnesia spinel refractories - Investigation with the concept of configurational forces (Artikel)
Gruber, D. and Sistaninia, M. and Fasching, C. and Kolednik, O.
Journal of the European Ceramic Society (2016)
Externer Link:Link - Thermomechanical failure modeling and investigation into lining optimization for a Ruhrstahl Heraeus snorkel (Artikel)
Jin, S. and Gruber, D. and Harmuth, H. and Rössler, R.
Engineering Failure Analysis (2016)
Externer Link:Link - Miniaturized fracture experiments to determine the toughness of individual films in a multilayer system (Artikel)
Treml, R. and Kozic, D. and Schöngrundner, R. and Kolednik, O. and Gänser, H.P. and Brunner, R. and Kiener, D.
Extreme Mechanics Letters (2016)
Externer Link:Link - A finite element model to simulate the physical mechanisms of wear and crack initiation in wheel/rail contact (Artikel)
Daves, W. and Kubin, W. and Scheriau, S. and Pletz, M.
Wear (2016)
Externer Link:Link