Publications




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature (Artikel)
    Bermejo, R. and Grünbichler, H. and Kreith, J. and Auer, C.
    Journal of the European Ceramic Society (2010)
    Externer Link:Link
  • Synthesis and characterisation of sputtered hard coatings within the system Cr-N/WSx (Artikel)
    Budna, K. P. and Mitterer, C.
    Surface Engineering (2010)
    Externer Link:Link
  • Non-destructive evaluation of decarburization of spring steel using electromagnetic measurement (Artikel)
    Burzic, D. and Zamberger, J. and Kozeschnik, E.
    NDT and E International (2010)
    Externer Link:Link
  • ATAT@WIEN2k: An interface for cluster expansion based on the linearized augmented planewave method (Artikel)
    Chakraborty, M. and Spitaler, J. and Puschnig, P. and Ambrosch-Draxl, C.
    Computer Physics Communications (2010)
    Externer Link:Link
  • Numerical analysis on special cracking phenomena of residual compressive inter-layers in ceramic laminates (Artikel)
    Chen, C.R. and Bermejo, R. and Kolednik, O.
    Engineering Fracture Mechanics (2010)
    Externer Link:Link
  • Combined numerical and experimental investigations on fretting wear (Artikel)
    Christiner, T. and Reiser, J. and Godor, I. and Maderbacher, H. and Eichlseder, W. and Trieb, F. and Stühlinger, R.
    Procedia Engineering (2010)
    Externer Link:Link
  • Powder metallurgy manufacturing of carbon-free precipitation hardened high speed steels (Artikel)
    Danninger, H. and Harold, C. and Gierl, C. and Ponemayr, H. and Daxelmueller, M. and Simancik, F. and Izdinsky, K.
    Acta Physica Polonica A (2010)
    Externer Link:Link
  • Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics (Artikel)
    Deluca, M. and Bermejo, R. and Grünbichler, H. and Presser, V. and Danzer, R. and Nickel, K.
    Scripta Materialia (2010)
    Externer Link:Link
  • Fatigue damage mechanisms and damage evolution near cyclically loaded edges (Artikel)
    Ebner, R. and Gruber, P. and Ecker, W. and Kolednik, O. and Krobath, M. and Jesner, G.
    Bulletin of the Polish Academy of Sciences (2010)
    Externer Link:Link
  • Can local hot spots induce a2/y lamellae during incomplete massive transformation of y-TiAl alloys? (Artikel)
    F.D. Fischer and L. Cha and G. Dehm and H. Clemens
    Intermetallics (2010)
    Externer Link:Link
  • Stresses in hollow nanoparticles (Artikel)
    Fischer, F.D. and Svoboda, J.
    International Journal of Solids and Structures (2010)
    Externer Link:Link
  • Substitutional diffusion in multicomponent solids with non-ideal sources and sinks for vacancies (Artikel)
    Fischer, F.D. and Svoboda, J.
    Acta Materialia (2010)
    Externer Link:Link
  • Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy - Experiments and modeling (Artikel)
    F.D. Fischer and T. Waitz and Ch. Scheu and L. Cha and G. Dehm and T. Antretter and H. Clemens
    Intermetallics (2010)
    Externer Link:Link
  • A kinetic model of the transformation of a micropatterned amorphous precursor into a porous single crystal (Artikel)
    Fratzl, P. and Fischer, F.D. and Svoboda, J. and Aizenberg, J.
    Acta Biomaterialia (2010)
    Externer Link:Link
  • A simple engineering estimate of the fatigue notch factor of arbitrary stress concentrators (Artikel)
    Gänser, H.P. and Javidi, A.
    Advanced Engineering Materials (2010)
    Externer Link:Link
  • Flow properties of PLZTN aqueous suspensions for tape casting (Artikel)
    Gardini, D. and Deluca, M. and Nagliati, M. and Galassi, C.
    Ceramics International (2010)
    Externer Link:Link
  • Model scale generation and microscopic characterisation of tribofilms formed on Fe and Cu alloys (Artikel)
    Grün, F. and Godor, I. and Javidi, A. and Pondicherry, K. and Offenbecher, M. and Bertram, R.
    Lubrication Science (2010)
    Externer Link:Link
  • Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties (Artikel)
    Grünbichler, H. and Kreith, J. and Bermejo, R. and Supancic, P. and Danzer, R.
    Journal of the European Ceramic Society (2010)
    Externer Link:Link
  • A study on the principle of maximum dissipation for coupled and noncoupled non-isothermal processes in materials (Artikel)
    Hackl, K. and Fischer, F.D. and Svoboda, J.
    Proceedings of the Royal Society A (2010)
    Externer Link:Link
  • FEM-simulation of high-speed corrugation process with abaqus/explicit (Artikel)
    Hatzenbichler, T. and Buchmayr, B. and Weiss, S.
    Steel Research International (2010)
    Externer Link:Link
56 57 58 59 60 61 62 63 64 65 66