Publications




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Calculation of energies of coherent interfaces and application to the nucleation, growth and coarsening of precipitates (Artikel)
    Sonderegger, B. and Holzer, I. and Kozeschnik, E.
    Materials Science Forum (2010)
    Externer Link:Link
  • Kinetics of precipitation in a complex hot-work tool steel (Artikel)
    Sonderegger, B. and Kozeschnik, E. and Leitner, H. and Clemens, H. and Svoboda, J. and Fischer, F.D. and Staron, P.
    Steel Research International (2010)
    Externer Link:Link
  • Application of fatigue approaches on fillet welds of high strength steel (Artikel)
    Stoschka, M. and Leitner, M. and Fössl, T. and Leitner, H. and Eichlseder, W.
    Materialwissenschaft und Werkstofftechnik (2010)
    Externer Link:Link
  • Model for coarsening of intergranular precipitates in multicomponent systems (Artikel)
    Svoboda, J. and Fischer, F.D.
    Scripta Materialia (2010)
    Externer Link:Link
  • Modeling of diffusional phase transformation in multi-component systems with stoichiometric phases (Artikel)
    Svoboda, J. and Fischer, F.D. and Abart, R.
    Acta Materialia (2010)
    Externer Link:Link
  • In-line characterization of polypropylene nanocomposites using FT-NIR (Artikel)
    Witschnigg, A. and Laske, S. and Kracalik, M. and Feuchter, M. and Pinter, G. and Maier, G. and Märzinger, W. and Haberkorn, M. and Langecker, G.R. and Holzer, C.
    Journal of Applied Polymer Science (2010)
    Externer Link:Link
  • Short-term creep behavior of an X 37 Cr Mo V 5-1 hot-work tool steel with almost bainitic and fully martensitic microstructures (Artikel)
    Wurmbauer, H. and Leitner, H. and Panzenböck, M. and Scheu, C. and Clemens, H.
    Steel Research International (2010)
    Externer Link:Link
  • Short-term creep behavior of chromium rich hot-work tool steels - Kurzzeitkriechverhalten von chromreichen Warmarbeitsstählen (Artikel)
    Wurmbauer, H. and Panzenböck, M. and Leitner, H. and Scheu, C. and Clemens, H.
    Materialwissenschaft und Werkstofftechnik (2010)
    Externer Link:Link
  • Cyclic loading behavior of micro-sized polycrystalline copper wires (Artikel)
    Yang, B. and C. Motz and W. Grosinger and G. Dehm
    Procedia Engineering (2010)
    Externer Link:Link
  • Overview of the grain size effects on the mechanical and deformation behaviour of electrodeposited nanocrystalline nickel - From nanoindentation to high pressure torsion (Artikel)
    Yang, B. and Vehoff, H. and Pippan, R.
    Materials Science Forum (2010)
    Externer Link:Link
  • Bulk nanostructured functional materials by severe plastic deformation (Artikel)
    Zehetbauer, M. and Grössinger, R. and Krenn, H. and Krystian, M. and Pippan, R. and Rogl, P. and Waitz, T. and Würschum, R.
    Advanced Engineering Materials (2010)
    Externer Link:Link
  • Thermodynamic model for diffusion controlled reaction rim growth in a binary system: Application to the forsterite-enstatite-quartz system (Artikel)
    Abart, R. and Petrishcheva, E. and Fischer, F.D. and Svoboda, J.
    American Journal of Science (2009)
    Externer Link:Link
  • Influence of internal architectures on the fracture response of LTCC components (Artikel)
    Bermejo, R. and Kraleva, I. and Antoni, M. and Supancic, P. and Morrell, R.
    Key Engineering Materials (2009)
    Externer Link:Link
  • Particle-reinforced carbon-free precipitation-hardening high-speed steels (Artikel)
    Danninger, H. and Harold, C. and Rouzbahani, F. and Ponemayr, H. and Daxemüller, M. and Simancik, F. and Izdinsky, K.
    International Journal of Powder Metallurgy (2009)
    Externer Link:Link
  • Analysis of non-steady-state distribution functions for grain growth and coarsening (Artikel)
    Fischer, F.D. and Svoboda, J. and Gamsjäger, E.
    Philosophical Magazine (2009)
    Externer Link:Link
  • Cellulose in never-dried gel oriented by an AC electric field (Artikel)
    Gindl, W. and Emsenhuber, G. and Maier, G. and Keckes, J.
    Biomacromolecules (2009)
    Externer Link:Link
  • Influence of the sample size on the results of B3B-tests (Artikel)
    Harrer, W. and Danzer, R. and Supancic, P. and Lube, T.
    Key Engineering Materials (2009)
    Externer Link:Link
  • Density and thermal expansion of the aluminium alloy Al-17Si-4Cu (A390) in the solid and liquid states (Artikel)
    Kaschnitz, E. and Ebner, R.
    High Temperatures High Pressures (2009)
    Externer Link:Link
  • On the importance of sample compliance in uniaxial microtesting (Artikel)
    Kiener, D. and Grosinger, W. and Dehm, G.
    Scripta Materialia (2009)
    Externer Link:Link
  • Micro-compression testing: A critical discussion of experimental constraints (Artikel)
    Kiener, D. and Motz, C. and Dehm, G.
    Materials Science and Engineering: A (2009)
    Externer Link:Link
58 59 60 61 62 63 64 65 66 67 68