Publications
- Low-friction TiN coatings deposited by PACVD (Artikel)
Stoiber, M. and Badisch, E. and Lugmair, C. and Mitterer, C.
Surface and Coatings Technology (2003)
Externer Link:Link - Nanocomposite coatings within the system Ti-B-N deposited by plasma assisted chemical vapor deposition (Artikel)
Stoiber, M. and Mitterer, C. and Schöberl, T. and Badisch, E. and Fontalvo, G. and Kullmer, R.
Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures (2003)
Externer Link:Link - Plasma-assisted pre-treatment for PACVD TiN coatings on tool steel (Artikel)
Stoiber, M. and Wagner, J. and Mitterer, C. and Gammer, K. and Hutter, H. and Lugmair, C. and Kullmer, R.
Surface and Coatings Technology (2003)
Externer Link:Link - Influence of Cr23C6 carbides on dynamic recrystallization in hot deformed nimonic 80a alloys (Artikel)
Tian, B. and Lind, C. and Paris, O.
Materials Science and Engineering A (2003)
Externer Link:Link - Local microstructure and its influence on precipitation behavior in hot deformed nimonic 80a (Artikel)
Tian, B. and Zickler, G.A. and Lind, C. and Paris, O.
Acta Materialia (2003)
Externer Link:Link - Separation of scattering contributions from carbides and y' precipitates in Nimonic 80a by combining small-angle X-ray and neutron scattering (Artikel)
Zickler, G.A. and Tian, B. and Lind, C. and Paris, O.
Journal of Applied Crystallography (2003)
Externer Link:Link - Designed fully lamellar microstructures in a y-TiAl based alloy: adjustment and microstructural changes upon long-term isothermal exposure at 700 and 800 °C (Artikel)
Beschliesser, M. and Chatterjee, A. and Lorich, A. and Knabl, W. and Kestler, H. and Dehm, G. and Clemens, H.
Materials Science and Engineering A (2002)
Externer Link:Link - Fracture of green and sintered ceramic bodies (Artikel)
Börger, A. and Hangl, M. and Fellner, M. and Danzer, R.
Key Engineering Materials (2002)
Externer Link:Link - The ball on three balls test for strength testing of brittle discs: Stress distribution in the disc (Artikel)
Börger, A. and Supancic, P. and Danzer, R.
Journal of the European Ceramic Society (2002)
Externer Link:Link - Mechanical failure of advanced ceramics: The value of fractography (Artikel)
Danzer, R.
Key Engineering Materials (2002)
Externer Link:Link - Modelling of the plastification near the rough surface of a rail by the wheel-rail contact (Artikel)
Daves, W. and Fischer, F.D.
Wear (2002)
Externer Link:Link - Calculation of the influence of the weld pattern on the final residual stress state and deformation (Artikel)
Enzinger, N. and Cerjak, H.
Materials Science Forum (2002)
Externer Link:Link - Thermal shock failure of brittle materials (Artikel)
Fellner, M. and Supancic, P.
Key Engineering Materials (2002)
Externer Link:Link - Diffusional phase transformation and deformation in steels (Artikel)
Gamsjäger, E. and Antretter, T. and Schmaranzer, C. and Preis, W. and Chimani, C.M. and Simha, N.K. and Svoboda, J. and Fischer, F.D.
Computational Materials Science (2002)
Externer Link:Link - Dissimilar 2.25Cr/9Cr and 2Cr/0-5CrMoV steel welds Part 1: Characterisation of weld zone and numerical simulation (Artikel)
Kozeschnik, E. and Pölt, P. and Brett, S. and Buchmayr, B.
Science and Technology of Welding and Joining (2002)
Externer Link:Link - Fracture and fractography of electroceramics (Artikel)
Supancic, P.
Key Engineering Materials (2002)
Externer Link:Link - Diffusion in multi-component systems with no or dense sources and sinks for vacancies (Artikel)
Svoboda, J. and Fischer, F.D. and Fratzl, P. and Kroupa, A.
Acta Materialia (2002)
Externer Link:Link - Influence of solute segregation and drag on properties of migrating interfaces (Artikel)
Svoboda, J. and Fischer, F.D. and Gamsjäger, E.
Acta Materialia (2002)
Externer Link:Link - SANS investigation of phase separation in hot-deformed nimonic 80a (Artikel)
Tian, B. and Paris, O. and Zickler, G.A. and Lind, C. and Wasle, G. and May, R.P.
Scripta Materialia (2002)
Externer Link:Link - Monte Carlo simulations of strength distributions of brittle materials - Type of distribution, specimen and sample size (Artikel)
Danzer, R. and Lube, T. and Supancic, P.
Zeitschrift für Metallkunde (International Journal of Materials Research) (2001)
Externer Link:Link