Publications
- Determination of cyclic mechanical properties of thin copper layers for PCB applications (Artikel)
Fellner K., Fuchs P.F., Antretter T., Pinter G., Schöngrundner R.
2014 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2014 (2014)
Externer Link:Link - Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards (Artikel)
MacUrova K., Angerer P., Schöngrundner R., Krivec T., Morianz M., Antretter T., Bermejo R., Pletz M., Brizoux M., Maia W.
2014 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2014 (2014)
Externer Link:Link - Load characteristics of lead-free ceramic multilayer actuators based on bismuth-sodium-titanate (Artikel)
Reichmann K., Deluca M., Schütz D., Supancic P.
International Journal of Applied Ceramic Technology (2014)
Externer Link:Link - In situ observation of the dissolution of SiO2 particles in CaO-Al2O3-SiO2 slags and mathematical analysis of its dissolution pattern (Artikel)
Feichtinger S., Michelic S.K., Kang Y.-B., Bernhard C.
Journal of the American Ceramic Society (2014)
Externer Link:Link - Comparison of the fatigue and impact fracture behaviour of five different steel grades used in the frog of a turnout (Artikel)
Eck S., Oßberger H., Oßberger U., Marsoner S., Ebner R.
Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit (2014)
Externer Link:Link - Characterization of the crack initiation and crack propagation behavior of welded steels by means of the replica technique [Charakterisierung des Rissinitiierungund Rissfortschrittverhaltens von Schweißverbindungen mittels Replika-Technik] (Artikel)
Panzenböck M., Horn A., Posch G., Clemens H.
Praktische Metallographie/Practical Metallography (2014)
Externer Link:Link - Simulation of yield strength in Allvacspi® 718Plus™ (Artikel)
Ahmadi M.R., Whitmore L., Povoden-Karadeniz E., Stockinger M., Falahati A., Kozeschnik E.
Advanced Materials Research (2014)
Externer Link:Link - Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending (Artikel)
Stefenelli M., Riedl A., Todt J., Bartosik M., Daniel R., Mitterer C., Keckes J.
Materials Science Forum (2014)
Externer Link:Link - Precipitate strengthening of non-spherical precipitates extended in <100> or {100} direction in fcc crystals (Artikel)
Ahmadi, M. and Sonderegger, B. and Povoden-Karadeniz, E. and Falahati, A. and Kozeschnik, E.
Materials Science and Engineering: A (2013)
Externer Link:Link - Chromium/Chromium nitride multilayers during thermal treatment: An X-ray diffraction study (Artikel)
Angerer, P. and Lackner, J.M. and Wießner, M. and Maier, G.
International Journal of Refractory Metals and Hard Materials (2013)
Externer Link:Link - Role of vacancies in Work Hardening and Fatigue of TiAl Alloys (Artikel)
Appel, F. and Herrmann, D. and Fischer F.D. and Svoboda, J. and Kozeschnik, E.
International Journal of Plasticity (2013)
Externer Link:Link - Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film (Artikel)
Bartosik, M. and Daniel, R. and Mitterer, C. and Matko, I. and Burghammer, M. and Mayrhofer, P.H. and Keckes, J.
Thin Solid Films (2013)
Externer Link:Link - Subcritical crack growth in low temperature Co-fired ceramics under biaxial loading (Artikel)
Bermejo, R. and Supancic, P. and Krautgasser, C. and Morrell, R. and Danzer, R.
Engineering Fracture Mechanics (2013)
Externer Link:Link - In situ observation of austenite-ferrite interface migration in a lean Mn steel during cyclic partial phase transformations (Artikel)
Chen, H. and Gamsjäger, E. and Schider, S. and Khanbareh, H. and van der Zwaag, S.
Acta Materialia (2013)
Externer Link:Link - Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization (Artikel)
Daniel, R. and Keckes, J. and Matko, I. and Burghammer, M. and Mitterer, C.
Acta Materialia (2013)
Externer Link:Link - Austenite grain growth and the surface quality of continuously cast steel (Artikel)
Dippenaar, R. and Bernhard, C. and Schider, S. and Wieser, G.
Metallurgical and Materials Transactions B (2013)
Externer Link:Link - Macro defect free materials; Mechanochemical activation of raw mixes as the intensifying tool of the entire MDF synthesis (Artikel)
Drabik, M. and Galikova, L. and Billik, P. and Maier, G. and Kosednar-Legenstein, B.
Ceramics - Silikaty (2013)
Externer Link:Link - Comparison of the fatigue and impact fracture behaviour of 5 different steel grades used in the frog of a turnout (Artikel)
Eck, S. and Ossberger, H. and Ossberger, U. and Marsoner, S. and Ebner, R.
Journal of Rail and Rapid Transit (2013)
Externer Link:Link - An efficient algorithm for modeling the thermo-mechanical material response of heavy steel plates during accelerated cooling (Artikel)
Eßl, W. and Antretter, T. and Parteder, E.
Key Engineering Materials (2013)
Externer Link:Link - Modelling the influence of trapping on hydrogen permeation in metals (Artikel)
Fischer, F.D. and Mori, G. and Svoboda, J.
Corrosion Science (2013)
Externer Link:Link