Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Modern methods for the microscopic characterization of ZnO varistor grain boundaries [Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen] (Artikel)
    Raidl N., Sartory B., Supancic P., Danzer R.
    Praktische Metallographie/Practical Metallography (2018)
    Externer Link:Link
  • Investigation of the precipitation behavior of H-carbides in a TiAl alloy containing carbon by means of in-and ex-situ characterization [Untersuchung des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in-und ex-situ Experimenten] (Artikel)
    Burtscher M., Kirchheimer K., Weißensteiner I., Bernhard C., Lederhaas B., Klein T., Mayer S., Clemens H.
    Praktische Metallographie/Practical Metallography (2018)
    Externer Link:Link
  • Impact of the microstructure of refractory metals on their mechanical properties - A multi-scale study [Wie die Mikrostruktur von Refraktärmetallen deren mechanische Eigenschaften beeinflusst - Eine skalenübergreifende Studie] (Artikel)
    Maier-Kiener V., Siller M., Jakob S., Leitner K., Clemens H., Lorich A., Lang D., Schatte J., Eidenberger-Schober M., Knabl W.
    Praktische Metallographie/Practical Metallography (2018)
    Externer Link:Link
  • SPM—SEM Investigations of Semiconductor Nanowires for Integrated Metal Oxide Gas Sensors (Artikel)
    Verena Leitgeb 1, Katrin Fladischer , Frank Hitzel, Florentyna Sosada-Ludwikowska , Johanna Krainer, Robert Wimmer-Teubenbacher and Anton Köck
    Eurosensors 2018 (2018)
    Externer Link:Link
  • To the design of highly fracture-resistant composites by the application of the yield stress inhomogeneity effect (Artikel)
    Sistaninia, M. and Kasberger, R. and Kolednik, O.
    Composite Structures (2018)
    Externer Link:Link
  • The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys (Artikel)
    Appel, F. and Paul, D.H.J. and Staron, P. and Oehring, M. and Kolednik, O. and Predan, J. and Fischer F.D.
    Materials Science & Engineering A (2018)
    Externer Link:Link
  • Point defects at the Sigma 5(012)[100] grain boundary in TiN and the early stages of Cu diffusion: An ab initio study (Artikel)
    Popov, M. and Bochkarev, A. and Razumovskiy, V.I. and Puschnig, P. and Spitaler, J.
    Acta Materialia (2018)
    Externer Link:Link
  • Solute segregation in Cu: DFT vs. Experiment (Artikel)
    Razumovskiy, V.I. and Divinski, S.V. and Romaner, L.
    Acta Materialia (2018)
    Externer Link:Link
  • Matching in-situ and ex-situ recorded stress gradients in an AlxGa1-xN Heterostructure: Complementary wafer curvature analyses in time and space (Artikel)
    Reisinger, M. and Ostermaier, C. and Tomberger, M. and Zechner, J. and Sartory, B. and Ecker, W. and Daumiller, I. and Keckes, J.
    Scripta Materialia (2018)
    Externer Link:Link
  • Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings (Artikel)
    Tkadletz, M. and Schalk, N. and Mitterer, C. and Keckes, J. and Pohler, M. and Czettl, C.
    International Journal of Refractory Metals & Hard Materials (2018)
    Externer Link:Link
  • Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes (Artikel)
    M. Dios, I. Kraleva, Z. González, P. Alvaredo, B. Ferrari, E. Gordo, R. Bermejo
    Journal of Alloys and Compounds (2018)
    Externer Link:Link
  • Modern Methods for the Microscopic Characterization of ZnO Varistor Grain Boudaries (Artikel)
    Raidl N, Sartory B, Supancic P, Danzer R.
    Practical Metallography (2018)
    Externer Link:Link
  • Influence of accounting for translational motion of grains on grain growth kinetics and size distribution (Artikel)
    J. Svoboda, F.D. Fischer
    Scripta Materialia (2018)
    Externer Link:Link
  • Elastic stress–strain analysis of an infinite cylindrical inclusion with eigenstrain (Artikel)
    J. Svoboda, G. A. Zickler, F. D. Fischer
    Arch Appl Mech (2018)
    Externer Link:Link
  • An innovative concept for interstitial diffusion in stressed crystals (Artikel)
    J. Svoboda, G. A. Zickler, F. D. Fischer
    Int J Solids Struct (2018)
    Externer Link:Link
  • Experimental and numerical investigations of the gamma '' and gamma ' precipitation kinetics in Alloy 718 (Artikel)
    A. Drexler, B. Oberwinkler, S. Primig, C. Turk, E. Povoden-Karadeniz, A. Heinemann, W. Ecker, M. Stockinger
    Materials Science and Engineering A (2018)
    Externer Link:Link
  • In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing (Artikel)
    M. Alfreider, D. Kozic, O. Kolednik, D. Kiener
    Materials & Design (2018)
    Externer Link:Link
  • Impact of thermal atomic displacements on the Curie temperature of 3d transition metals (Artikel)
    A. V. Ruban and O. E. Peil
    Physical Review B (2018)
    Externer Link:Link
  • Microstructural Effects on the Toughness of a High Co–Ni Steel (Artikel)
    Gruber M., Ressel G., Ploberger S., Marsoner S., Kolednik O., Ebner R.
    Advanced Engineering Materials (2017)
    Externer Link:Link
  • Piezotronic Effect on Electrical Characteristics of Bulk ZnO Varistors (Artikel)
    Raidl N., Hofstätter M., Supancic P.
    Advanced Engineering Materials (2017)
    Externer Link:Link
14 15 16 17 18 19 20 21 22 23 24