Publikationen
- Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography (Artikel)
Mühlbacher, M. and Mendez-Martin, F. and Sartory, B. and Schalk, N. and Keckes, J. and Lu, J. and Hultman, L. and Mitterer, C.
Thin Solid Films (2015)
Externer Link:Link - Characterisation and quantification of cavities in 9Cr martensitic steel for power plants (Artikel)
Yadav, S.D. and Sonderegger, B. and Sartory, B. and Sommitsch, C. and Poletti, C.
Materials Science and Technology (2015)
Externer Link:Link - Standardized iron ore characterization methodology for metallurgy (Standardisierte Methodik zur Charakterisierung von Eisenerzen für die Metallurgie) (Artikel)
Kolb, F. and Pichler, A. and Mali, H. and Schenk, J.
Practical Metallography (Praktische Metallographie) (2015)
Externer Link:Link - Piezotronically modifed double schottky barriers in ZnO varistors (Artikel)
Raidl, N. and Supancic, P. and Danzer, R. and Hofstätter, M.
Advanced Materials (2015)
Externer Link:Link - Physically appropriate characterization of fatigue crack propagation rate in elastic-plastic materials using the J-integral concept (Artikel)
Ochensberger, W. and Kolednik, O.
International Journal of Fracture (2015)
Externer Link:Link - First-principles-aided design of a new Ni-base superalloy: Influence of transition metal alloying elements on grain boundary and bulk cohesion (Artikel)
Razumovskiy, V. and Lozovoi, A.Y. and Razumovskii, I.M.
Acta Materialia (2015)
Externer Link:Link - Numerical calibration of a yield limit function for rock materials by means of the Brazilian test and the uniaxial compression test (Artikel)
Mikl-Resch, M.J. and Antretter, T. and Gimpel, M. and Kargl, H. and Pittino, G. and Tichy, R. and Ecker, W. and Galler, R.
International Journal of Rock Mechanics and Mining Sciences (2015)
Externer Link:Link - Ab initio description of segregation and cohesion of grain boundaries in W-25 at.% Re alloys (Artikel)
Scheiber, D. and Razumovskiy, V. and Puschnig, P. and Pippan, R. and Romaner, L.
Acta Materialia (2015)
Externer Link:Link - Residual stress and microstructure depth gradients in nitrided iron-based alloys revealed by dynamical cross-sectional transmission X-ray microdiffraction (Artikel)
Kurz, S.J.B. and Meka, S.R. and Schell, N. and Ecker, W. and Keckes, J. and Mittermeijer, E.J.
Acta Materialia (2015)
Externer Link:Link - X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film (Artikel)
Stefenelli, M. and Daniel, R. and Ecker, W. and Kiener, D. and Todt, J. and Zeilinger, A. and Mitterer, C. and Burghammer, M. and Keckes, J.
Acta Materialia (2015)
Externer Link:Link - Influence of temperature and humidity on the strength of low temperature co-fired ceramics (Artikel)
Krautgasser, C. and Danzer, R. and Supancic, P. and Bermejo, R.
Journal of the European Ceramic Society (2015)
Externer Link:Link - Effect of Ni and Mn on the formation of Cu precipitates in alpha-Fe (Artikel)
Gorbatov, O.I and Gornastyrev, Y.N. and Korzhavyi, P.A. and Ruban, A.V.
Scripta Materialia (2015)
Externer Link:Link - Nanoindentation of chemical-vapor deposited Al2O3 hard coatings at elevated temperatures (Artikel)
Rebelo de Figueiredo, M. and Abad, M.D. and Harris, A.J. and Czettl, C. and Mitterer, C. and Hosemann, P.
Thin Solid Films (2015)
Externer Link:Link - Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media (Artikel)
Tkadletz, M. and Keckes, J. and Schalk, N. and Krajinovic, I. and and Burghammer, M. and Czettl, C. and Mitterer, C.
Surface and Coatings Technology (2015)
Externer Link:Link - Resolving depth evolution of microstructure and hardness in sputtered CrN film (Artikel)
Zeilinger, A. and Daniel, R. and Schöberl, T. and Stefenelli, M. and Sartory, B. and Keckes, J. and Mitterer, C.
Thin Solid Films (2015)
Externer Link:Link - FEM simulation of the size- and constraining effect in lead-free solder joints with the theory of strain gradient elasticity (Artikel)
Lederer, M. and Magnien, J. and Khatibi, G. and Weiss, B.
Journal of Physics: Conference Series (2015)
Externer Link:Link - Size effects in residual stress formation during quenching of cylinders made of hot-work tool steel (Artikel)
Schemmel, M. and Prevedel, P. and Schöngrundner, R. and Ecker, W. and Antretter, T.
Advances in Materials Science and Engineering (2015)
Externer Link:Link - Formation and interaction of point defects in group IVb transition metal carbides and nitrides (Artikel)
Razumovskiy, V. and Popov, M. and Ding, H. and Odqvist, J.
Computational Materials Science (2015)
Externer Link:Link - Single CuO nanowires decorated with sizeselected Pd nanoparticles for CO sensing in humid atmosphere (Artikel)
Steinhauer, S. and Singh, V. and Cassidy, C. and Gspan, C. and Grogger, W. and Sowwan, M. and Köck, A.
Nanotechnology (2015)
Externer Link:Link - Evolution of residual stress in Ti–Al–Ta–N coatings on hard metal milling inserts (Artikel)
Teppernegg, T. and Angerer, P. and Klünsner, T. and Tritremmel, C. and Czettl, C.
International Journal of Refractory Metals and Hard Materials (2015)
Externer Link:Link