Publikationen
- The influence of bias voltage on structure and mechanical/tribological properties of arc evaporated Ti-Al-V-N coatings (Artikel)
Pfeiler, M. and Kutschej, K. and Penoy, M. and Michotte, C. and Mitterer, C. and Kathrein, M.
Surface and Coatings Technology (2007)
Externer Link:Link - On the local variation of the crack driving force in a double mismatched weld (Artikel)
Predan, J. and Gubeljak, N. and Kolednik, O.
Engineering Fracture Mechanics (2007)
Externer Link:Link - Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies (Artikel)
Ecker, W. and Antretter, T. and Ebner, R.
Key Engineering Materials (2007)
Externer Link:Link - Fracture toughness investigations of tungsten alloys and SPD tungsten alloys (Artikel)
Faleschini, M. and Kreuzer, H. and Kiener, D. and Pippan, R.
Journal of Nuclear Materials (2007)
Externer Link:Link - On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation (Artikel)
Rüf, G. and Sommitsch, C. and Buchmayr, B.
International Journal of Materials Research (2007)
Externer Link:Link - Application of material forces to fracture of inhomogeneous materials: Illustrative examples (Artikel)
Fischer, F.D. and Predan, J. and Kolednik, O. and Simha, N.K.
Archive of Applied Mechanics (2007)
Externer Link:Link - A note on the principle of maximum dissipation rate (Artikel)
Fischer, F.D. and Svoboda, J.
Journal of Applied Mechanics (2007)
Externer Link:Link - Interaction of recrystallization and precipitation during hot forming of Alloy 80A (Artikel)
Sommitsch, C. and Pölt, P. and Rüf, G. and Mitsche, S. and Albu, M.
Materials Science Forum (2007)
Externer Link:Link - Hindered crack propagation in materials with periodically varying young's modulus - Lessons from biological materials (Artikel)
Fratzl, P. and Gupta, H.S. and Fischer, F.D. and Kolednik, O.
Advanced Materials Research (2007)
Externer Link:Link - Kinetics of the austenite-to-ferrite phase transformation - From the intrinsic to an effective interface mobility (Artikel)
Gamsjäger, E.
Materials Science Forum (2007)
Externer Link:Link - A note on the contact conditions at migrating interfaces (Artikel)
Gamsjäger, E.
Acta Materialia (2007)
Externer Link:Link - Kinetics of solute driven melting and solidification (Artikel)
Gamsjäger, E. and Svoboda, J. and Fischer, F.D. and Rettenmayr, M.
Acta Materialia (2007)
Externer Link:Link - Thermal stability of nanocomposite CrC/a-C:H thin films (Artikel)
Gassner, G. and Mayrhofer, P.H. and Patscheider, J. and Mitterer, C.
Thin Solid Films (2007)
Externer Link:Link - Tribological properties of nanocomposite CrCx/a-C:H thin films (Artikel)
Gassner, G. and Patscheider, J. and Mayrhofer, P.H. and Sturm, S. and Scheu, C. and Mitterer, C.
Tribology Letters (2007)
Externer Link:Link - A new approach to modelling of non-steady grain growth (Artikel)
Svoboda, J. and Fischer, F.D.
Acta Materialia (2007)
Externer Link:Link - Thermal diffusivity of the aluminum alloy Al-17Si-4Cu (A390) in the solid and liquid states (Artikel)
Kaschnitz, E. and Ebner, R.
International Journal of Thermophysics (2007)
Externer Link:Link - FIB damage of Cu and possible consequences for miniaturized mechanical tests (Artikel)
Kiener, D. and Motz, C. and Rester, M. and Jenko, M. and Dehm, G.
Materials Science and Engineering: A (2007)
Externer Link:Link - Influence of external and internal length scale on the flow stress of copper (Artikel)
Kiener, D. and Rester, M. and Scheriau, S. and Yang, B. and Pippan, R. and Dehm, G.
International Journal of Materials Research (2007)
Externer Link:Link - Single-crystal growth of NaCl-structure Al-Cr-N thin films on MgO(0 0 1) by magnetron sputter epitaxy (Artikel)
Willmann, H. and Beckers, H. and Giuliani, F. and Birch, J. and Mayrhofer, P.H. and Mitterer, C. and Hultman, L.
Scripta Materialia (2007)
Externer Link:Link - Thermal stability and age hardening of supersaturated AlCrN hard coatings (Artikel)
Willmann, H. and Mayrhofer, P.H. and Hultman, L. and Mitterer, C.
International Heat Treatment and Surface Engineering (2007)
Externer Link:Link