Publikationen
- Reconstruction of the domain orientation distribution function of polycrystalline PZT ceramics using vector piezoresponse force microscopy (Artikel)
Kratzer M, Lasnik M, Röhrig S, Teichert C, Deluca M.
Scientific Reports (2018)
Externer Link:Link - A new device for high-temperature in situ GISAXS measurements (Artikel)
Gerhard Fritz-Popovski, Sabine C. Bodner, Florentyna Sosada-Ludwikowska, Günther A. Maier, Roland Morak, Livia Chitu, Lutz Bruegemann, Joachim Lange, Hans-Georg Krane and Oskar Paris
Review of Scientific Instruments (2018)
Externer Link:Link - Parameter driven monitoring for a flip-chip LED module under power cycling condition (Artikel)
J. Magnien, L. Mitterhuber, J. Rosc, F. Schrank, S. Hörth, M. Hutter, S. Defregger, E. Kraker
Microelectronics Reliability (2018)
Externer Link:Link - Modern Methods for the Microscopic Characterization of ZnO Varistor Grain Boudaries (Artikel)
Raidl N, Sartory B, Supancic P, Danzer R.
Practical Metallography (2018)
Externer Link:Link - Influence of accounting for translational motion of grains on grain growth kinetics and size distribution (Artikel)
J. Svoboda, F.D. Fischer
Scripta Materialia (2018)
Externer Link:Link - Elastic stress–strain analysis of an infinite cylindrical inclusion with eigenstrain (Artikel)
J. Svoboda, G. A. Zickler, F. D. Fischer
Arch Appl Mech (2018)
Externer Link:Link - An innovative concept for interstitial diffusion in stressed crystals (Artikel)
J. Svoboda, G. A. Zickler, F. D. Fischer
Int J Solids Struct (2018)
Externer Link:Link - Experimental and numerical investigations of the gamma '' and gamma ' precipitation kinetics in Alloy 718 (Artikel)
A. Drexler, B. Oberwinkler, S. Primig, C. Turk, E. Povoden-Karadeniz, A. Heinemann, W. Ecker, M. Stockinger
Materials Science and Engineering A (2018)
Externer Link:Link - Remarkable impact of low BiYbO3 doping levels on the local structure and phase transitions of BaTiO3 (Artikel)
Deluca, M. and Al-Jlaihawi, Z. G. and Reichmann, K. and Bell, A.N.T. and Feteira, A.
Journal of Materials Chemistry A (2018)
Externer Link:Link - In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing (Artikel)
M. Alfreider, D. Kozic, O. Kolednik, D. Kiener
Materials & Design (2018)
Externer Link:Link - Structure-property correlations and origin of relaxor behaviour in BaCexTi(1-x)O(3) (Artikel)
Giovanna Canu, Giorgia Confalonieri, Marco Deluca, Lavinia Curecheriu, Maria Teresa Buscaglia, Mihai Asandulesa, Nadejda Horchidan, Monica Dapiaggi, Liliana Mitoseriu, Vincenzo Buscaglia
Acta Materialia (2018)
Externer Link:Link - Cu-SiO2 hybrid bonding simulation including surface roughness and viscoplastic material modeling: A critical comparison of 2D and 3D modeling approach (Artikel)
Thomas Wlanis, René Hammer, Werner Ecker, Sandrine Lhostis, Clément Sart, Sébastien Gallois-Garreignot, Bernhard Rebhan, Günther A. Maier
Microelectronics Reliability (2018)
Externer Link:Link - Impact of thermal atomic displacements on the Curie temperature of 3d transition metals (Artikel)
A. V. Ruban and O. E. Peil
Physical Review B (2018)
Externer Link:Link - Microstructural Effects on the Toughness of a High Co–Ni Steel (Artikel)
Gruber M., Ressel G., Ploberger S., Marsoner S., Kolednik O., Ebner R.
Advanced Engineering Materials (2017)
Externer Link:Link - Piezotronic Effect on Electrical Characteristics of Bulk ZnO Varistors (Artikel)
Raidl N., Hofstätter M., Supancic P.
Advanced Engineering Materials (2017)
Externer Link:Link - Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited – Part II: Thermokinetic Simulation (Artikel)
Stechauner G., Primig S., Kozeschnik E.
Steel Research International (2017)
Externer Link:Link - Investigation of the Gas-Jet Wiping Process − Two-Phase Large Eddy Simulations Elucidate Impingement Dynamics and Wave Formation on Zinc Coatings (Artikel)
Pfeiler C., Eßl W., Reiss G., Riener C.K., Angeli G., Kharicha A.
Steel Research International (2017)
Externer Link:Link - Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy (Artikel)
Tian Y., Gorbatov O.I., Borgenstam A., Ruban A.V., Hedström P.
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2017)
Externer Link:Link - Material properties of CMT—metal additive manufactured duplex stainless steel blade-like geometries (Artikel)
Posch G., Chladil K., Chladil H.
Welding in the World (2017)
Externer Link:Link - Experimental and calculation challenges of crack propagation in notches – From initiation to end of lifetime (Artikel)
Kolitsch S., Gänser H.-P., Pippan R.
International Journal of Fatigue (2017)
Externer Link:Link