Publikationen
- Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness (Artikel)
Dai, Y. and Gruber, D. and Harmuth, H.
Journal of the European Ceramic Society (2017)
Externer Link:Link - Simulation of Acoustic Wave Propagation in Aluminium Coatings for Material Characterization (Artikel)
Grünwald, E. and Hammer, R. and Nuster, R. and Wieser, P.A. and Hinderer, M. and Wiesler, I. and Zelsacher, R. and Ehmann, M. and Brunner, R.
coatings (2017)
Externer Link:Link - Accretion Detection via Scanning Acoustic Microscopy in Microelectronic Components - Considering Symmetry Breaking Effects (Artikel)
Grünwald, E. and Hammer, R. and Rosc, J. and Sartory, B. and Brunner, R.
Microscopy and Microanalysis (2017)
Externer Link:Link - Effect of a Number of Transition Metals on the Cohesive Properties of Cr-Ni-Base Alloys (Artikel)
Butrim, V.N. and Razumovskiy, V.I. and Beresnev, A.G. and Trushnikova, A.S. and Razumovskii, I.M.
Materials Science Forum (2017)
Externer Link:Link - Micro-Mechanical In Situ Measurements in Thin Film Systems Regarding the Determination of Residual Stress, Fracture Properties and Interface Toughness (Artikel)
Konetschnik, R. and Kiener, D. and Kosic, D. and Gänser, H.-P. and Brunner, R.
Microscopy and Microanalysis (2017)
Externer Link:Link - 3D Microanalysis of Porous Copper Using FIB-Tomography in Combination with X-ray Computed Tomography (Artikel)
Wijaya, A. and Eichinger, B. and Rosc, J. and Sartory, B. and Mischitz, M. and Brunner, R.
Microscopy and Microanalysis (2017)
Externer Link:Link - 3D Characterization of Silicon Based Electrode Material for Advanced Lithium-Ion Storage Technologies (Artikel)
Vorauer, T. and Rosc, J. and Jouneau, P.H. and Bayle-Guillemaud, P. and Fuchsbichler, B. and Koller, S. and Brunner, R.
Microscopy and Microanalysis (2017)
Externer Link:Link - Selective interface toughness measurements of layered thin films (Artikel)
Konetschnik, R. and Daniel, R. and Brunner, R. and Kiener, D.
AIP ADVANCES (2017)
Externer Link:Link - Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered Stacks (Artikel)
Grünwald, E. and Nuster, R. and Paltauf, G. and Maier, T. and Wimmer-Teubenbacher, R. and Konetschnik, R. and Kiener, D. and Leitgeb, V. and Köck, A. and Brunner, R.
Materials Today: Proceedings (2017)
Externer Link:Link - Strength of WC-Co hard metals as a function of the effectively loaded volume (Artikel)
Jonke, M. and Klünsner, T. and Supancic, P. and Harrer, W. and Glätzle, J. and Barbist, R. and Ebner, R.
Int. Journal of Refractory Metals and Hard Materials (2017)
Externer Link:Link - Microstructural Effects on the Toughness of a High Co–Ni Steel (Artikel)
Gruber M., Ressel G., Ploberger S., Marsoner S., Kolednik O., Ebner R.
Advanced Engineering Materials (2017)
Externer Link:Link - Piezotronic Effect on Electrical Characteristics of Bulk ZnO Varistors (Artikel)
Raidl N., Hofstätter M., Supancic P.
Advanced Engineering Materials (2017)
Externer Link:Link - Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited – Part II: Thermokinetic Simulation (Artikel)
Stechauner G., Primig S., Kozeschnik E.
Steel Research International (2017)
Externer Link:Link - Investigation of the Gas-Jet Wiping Process − Two-Phase Large Eddy Simulations Elucidate Impingement Dynamics and Wave Formation on Zinc Coatings (Artikel)
Pfeiler C., Eßl W., Reiss G., Riener C.K., Angeli G., Kharicha A.
Steel Research International (2017)
Externer Link:Link - Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy (Artikel)
Tian Y., Gorbatov O.I., Borgenstam A., Ruban A.V., Hedström P.
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2017)
Externer Link:Link - Material properties of CMT—metal additive manufactured duplex stainless steel blade-like geometries (Artikel)
Posch G., Chladil K., Chladil H.
Welding in the World (2017)
Externer Link:Link - Experimental and calculation challenges of crack propagation in notches – From initiation to end of lifetime (Artikel)
Kolitsch S., Gänser H.-P., Pippan R.
International Journal of Fatigue (2017)
Externer Link:Link - Deformation mechanisms during severe plastic deformation of a Cu[sbnd]Ag composite (Artikel)
Kormout K.S., Ghosh P., Maier-Kiener V., Pippan R.
Journal of Alloys and Compounds (2017)
Externer Link:Link - Corrigendum to “Donor doping of K0.5Na0.5NbO3 ceramics with strontium and its implications to grain size, phase composition and crystal structure” [J. Eur. Ceram. Soc. 37/5 (2017) 2073–2082] (S0955221916307063)(10.1016/j.jeurceramsoc.2016.12.053)) (Artikel)
Hreščak J., Dražić G., Deluca M., Arčon I., Kodre A., Dapiaggi M., Rojac T., Malič B., Bencan A.
Journal of the European Ceramic Society (2017)
Externer Link:Link - Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT) (Artikel)
Strobl S., Lube T., Supancic P., Schöppl O., Danzer R.
Journal of the European Ceramic Society (2017)
Externer Link:Link