Publikationen
- A new roughness parameter to evaluate the near-surface deformation in dry rolling/sliding contact (Artikel)
Kubin, W. and Pletz, M. and Daves, W. and Scheriau, S.
Tribology International (2013)
Externer Link:Link - Determining the fracture resistance of thin sheet fiber composites - Paper as a model material (Artikel)
Zechner, J. and Janko, M. and Kolednik, O.
Composites Science and Technology (2013)
Externer Link:Link - Paper multilayer with a fracture toughness of steel (Artikel)
Zechner, J. and Kolednik, O.
Journal of Materials Science (2013)
Externer Link:Link - The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength (Artikel)
Lube, T. and Witschnig, S. and Supancic, P. and Danzer, R. and Schöppl, O.
Fractography of Glasses and Ceramics VI (2012)
Externer Link:Link - Experimental approach to assess the effect of metallization on the strength of functional ceramic components (Artikel)
Bermejo, R. and Supancic, P. and Aldrian, F. and Danzer, R.
Scripta Materialia (2012)
Externer Link:Link - The effect of phase composition on the mechanical properties of LTCC material (Artikel)
Makarovic, K. and Bencan, A. and Hrovat, M. and Holc, J. and Malic, B. and Kosec, M. and Bermejo, R. and Kraleva, I.
International Journal of Applied Ceramic Technology (2012)
Externer Link:Link - Investigation of the ferroelectric-relaxor crossover in Ce-doped BaTiO3 ceramics by impedance spectroscopy and Raman study (Artikel)
Curecheriu, L.P. and Deluca, M. and Mocanu, Z.V. and Pop, M.V. and Nica, V. and Horchidan N. and Buscaglia, M.T. and Buscaglia, M. and van Bael, M. and Hardy, A. and Mitoseriu, L.
Phase Transitions (2012)
Externer Link:Link - A wheel set / crossing model regarding impact, sliding and deformation - Explicit finite element approach (Artikel)
Pletz, M. and Daves, W. and Ossberger, H.
Wear (2012)
Externer Link:Link - A wheel passing a crossing nose: Dynamic analysis under high axle loads using finite element modelling (Artikel)
Pletz, M. and Daves, W. and Ossberger, H.
Journal of Rail and Rapid Transit (2012)
Externer Link:Link - Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contact (Artikel)
Pondicherry, K. and Grün, F. and Godor, I. and Bertram, R. and Offenbecher, M.
Lubrication Science (2012)
Externer Link:Link - Influence of deposited metal structures on the failure mechanisms of silicon-based components (Artikel)
Deluca, M. and Bermejo, R. and Pletz, M. and Wießner, M. and Supancic, P. and Danzer, R.
Journal of the European Ceramic Society (2012)
Externer Link:Link - The TiO2(100)/(0001)Al2O3 interface: A first-principles study supported by experiment (Artikel)
Popov, M. and Spitaler, J. and Mühlbacher, M. and Walter, C. and Keckes, J. and Mitterer, C. and Ambrosch-Draxl, C.
Physical Review B (2012)
Externer Link:Link - Raman spectroscopic study of layered quaternary ferrite Ba12Fe28Ti15O84 (Artikel)
Deluca, M. and Curecheriu L.P. and Neagu, A. and Apachitei, M.T. and Buscaglia, M. and Canu, G. and Oshita, K. and Kim, J.G. and Harima, H. and Buscaglia, V.
Phase Transitions (2012)
Externer Link:Link - High-field dielectric properties and Raman spectroscopic investigation of the ferroelectric-to-relaxor crossover in BaSnxTi1-xO3 ceramics (Artikel)
Deluca, M. and Stoleriu, L. and Curecheriu L.P. and Horchidan N. and Ianculescu A.C. and Galassi, C. and Mitoseriu, L.
Journal of Applied Physics (2012)
Externer Link:Link - Investigation of the composition-dependent properties of BaTi1-xZrxO3 ceramics prepared by the modified Pechini method (Artikel)
Deluca, M. and Vasilescu, C.A. and Ianculescu, A.C. and Berger, D.C. and Ciomaga, C.E. and Curecheriu, L.P. and Stoleriu, L. and Gajovic, A. and Mitoseriu, L. and Galassi, C.
Journal of the European Ceramic Society (2012)
Externer Link:Link - 3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography (Artikel)
Domitner, J. and Hölzl, C. and Kharicha, A. and Wu, M. and Ludwig, A. and Köhler, M. and Ratke, L.
Materials Science and Engineering (2012)
Externer Link:Link - Macro defect free materials; The challenge of mechanochemical activation (Artikel)
Drabik, M. and Bilik, P. and Galikova, L.
Ceramics - Silikaty (2012)
Externer Link:Link - A finite element model for carburisation of surface densified PM components (Artikel)
Eck, S. and Ishmurzin, A. and Wlanis, T. and Ebner, R. and Planitzer, F. and Hatzenbichler, T.
International Journal of Computational Materials Science and Surface Engineering (2012)
Externer Link:Link - A novel approach for determining fracture toughness of hard coatings on the micrometer scale (Artikel)
Riedl, A. and Daniel, R. and Stefenelli, M. and Schöberl, T. and Kolednik, O. and Mitterer, C. and Keckes, J.
Scripta Materialia (2012)
Externer Link:Link - New self-regulating ceramic PTC thermistor heating elements with strongly improved performance (Artikel)
Röhrig, S. and Supancic, P.
Ceramic Forum International (2012)