Publikationen
- Multi-class grain size model for forged alloy 718 aircraft parts (Artikel)
Gruber C., Raninger P., Stockinger M., Bucher C.
Materials Science Forum (2021)
Externer Link:Link - Hydrogen segregation near a crack tip in nickel (Artikel)
A. Drexler, S. He, R. Pippan, L. Romaner, V.I. Razumovskiy, W. Ecker
Scripta Materialia (2021)
Externer Link:Link - Impact of electric field at rough copper lines on failure time due to electrochemical migration in PCBs (Artikel)
Reiss G., Kosednar-Legenstein B., Riedler J., Eßl W.
Microelectronics Reliability (2021)
Externer Link:Link - Inductive Thermography as Non-Destructive Testing for Railway Rails (Artikel)
Tuschl, Christoph; Oswald-Tranta, Beate; Eck, Sven
Applied Sciences (2021)
Externer Link:Link - How the interface type manipulates the thermomechanical response of nanostructured metals: A case study on nickel (Artikel)
Renk O., Maier-Kiener V., Motz C., Eckert J., Kiener D., Pippan R.
Materialia (2021)
Externer Link:Link - A semi-physical α-β model on bainite transformation kinetics and carbon partitioning (Artikel)
Wei W., Retzl P., Kozeschnik E., Erwin Povoden-Karadeniz
Acta Materialia (2021)
Externer Link:Link - In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Artikel)
Burtscher M., Alfreider M., Schmuck K., Clemens H., Mayer S., Kiener D.
Journal of Materials Research (2021)
Externer Link:Link - Ion irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffraction (Artikel)
K. Hlushko, A. Mackova, J. Zalesak, M. Burghammer, A. Davydok, C. Krywka, R. Daniel, J. Keckes, J. Todt
Thin Solid Films (2021)
Externer Link:Link - Mechanical properties of single and polycrystalline α-Al2O3 coatings grown by chemical vapor deposition (Artikel)
Konstantiniuk F., Tkadletz M., Kainz C., Czettl C., Schalk N.
Surface and Coatings Technology (2021)
Externer Link:Link - The worm-LBM, an algorithm for a high number of propagation directions on a lattice Boltzmann grid: The case of phonon transport (Artikel)
Hammer R., Fritz V., Bedoya-Martínez N.
International Journal of Heat and Mass Transfer (2021)
Externer Link:Link - Extracting information from noisy data: strain mapping during dynamic in situ SEM experiments (Artikel)
Alfreider M., Meindlhumer M., Maier-Kiener V., Hohenwarter A., Kiener D.
Journal of Materials Research (2021)
Externer Link:Link - Machine learning assisted calibration of a ductile fracture locus model (Artikel)
Baltic S., Asadzadeh M.Z., Hammer P., Magnien J., Gänser H.-P., Antretter T., Hammer R.
Materials and Design (2021)
Externer Link:Link - In situ investigation of the oxidation behaviour of chemical vapour deposited Zr(C,N) hard coatings using synchrotron x–ray diffraction (Artikel)
Frank F., Tkadletz M., Saringer C., Stark A., Schell N., Deluca M., Czettl C., Schalk N.
Coatings (2021)
Externer Link:Link - Effect of solder joint size and composition on liquid-assisted healing (Artikel)
Siroky G., Kraker E., Magnien J., Melinc D., Kieslinger D., Kozeschnik E., Ecker W.
Microelectronics Reliability (2021)
Externer Link:Link - A range-relaxed criteria for choosing the Lagrange multipliers in the iterated Tikhonov Kaczmarz method for solving systems of linear ill-posed equations (Artikel)
Filippozzi R., Rabelo J.C., Boiger R., Leitao A.
Inverse Problems (2021)
Externer Link:Link - Thermal and spatial resolution in scanning thermal microscopy images: A study on the probe’s heating parameters (Artikel)
V. Leitgeb, R. Hammer, L. Mitterhuber, K. Fladischer, F. Peter, A. Buerke, S. Defregger
Journal of Applied Physics (2021)
Externer Link:Link - Characterization of the γ-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques (Artikel)
Bernhard M., Fuchs N., Presoly P., Angerer P., Friessnegger B., Bernhard C.
Materials Characterization (2021)
Externer Link:Link - A physical reason for asymmetric creep deformation behaviour of WC-Co hardmetal under tension and compression loading at 700 °C and 800 °C (Artikel)
Kathrin Maier, Thomas Klünsner, Werner Ecker, Philip Pichler, Stefan Marsoner, Christoph Czettl, Jonathan Schäfer, Reinhold Ebner
International Journal of Refractory Metals and Hard Materials (2021)
Externer Link:Link - Monte Carlo study of Cu precipitation in bcc-Fe: Temperature-dependent cluster expansion versus local chemical environment potentials (Artikel)
Redermeier A., Kozeschnik E.
Modelling and Simulation in Materials Science and Engineering (2021)
Externer Link:Link - Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing, (Artikel)
Matthias Gsellmann, Thomas Klünsner, Christian Mitterer, Martin Krobath, Michael Wurmshuber, Harald Leitner, Werner Ecker, Stefan Marsoner, Verena Maier-Kiener, Daniel Kiener, Gerald Ressel,
Materials and Design (2021)
Externer Link:Link