Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Assessment of methods for calculating contact pressure in wheel-rail/switch contact (Artikel)
    Wiest, M. and Kassa, E. and Daves, W. and Nielsen, J.C.O. and Ossberger, H.
    Wear (2008)
    Externer Link:Link
  • Tensile behaviour of micro-sized copper wires studied using a novel fibre tensile module (Artikel)
    Yang, B. and Motz, C. and Grosinger, W. and Kammrath, W. and Dehm, G.
    International Journal of Materials Research (2008)
    Externer Link:Link
  • Strain effects on the coarsening and softening of electrodeposited nanocrystalline Ni subjected to high pressure torsion (Artikel)
    Yang, B. and Vehoff, H. and Hohenwarter, A. and Hafok, M. and Pippan, R.
    Scripta Materialia (2008)
    Externer Link:Link
  • A combined cluster dynamics/kinetic Monte Carlo model for precipitate nucleation in interstitial/substitutional alloys (Artikel)
    Zenisek, J. and Svoboda, J. and Kozeschnik, E. and Fischer, F.D.
    Modelling and Simulation in Materials Science and Engineering (2008)
    Externer Link:Link
  • Prediction of the fracture toughness of a ceramic multilayer composite - Modeling and experiments (Artikel)
    Chen, C.R. and Pascual, J. and Fischer, F.D. and Kolednik, O. and Danzer, R.
    Acta Materialia (2007)
    Externer Link:Link
  • The ball on three balls test - Strength and failure analysis of different materials (Artikel)
    Danzer, R. and Harrer, W. and Supancic, P. and Lube, T. and Wang, Z. and Börger, A.
    Journal of the European Ceramic Society (2007)
    Externer Link:Link
  • Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies (Artikel)
    Ecker, W. and Antretter, T. and Ebner, R.
    Key Engineering Materials (2007)
    Externer Link:Link
  • Fracture toughness investigations of tungsten alloys and SPD tungsten alloys (Artikel)
    Faleschini, M. and Kreuzer, H. and Kiener, D. and Pippan, R.
    Journal of Nuclear Materials (2007)
    Externer Link:Link
  • Application of material forces to fracture of inhomogeneous materials: Illustrative examples (Artikel)
    Fischer, F.D. and Predan, J. and Kolednik, O. and Simha, N.K.
    Archive of Applied Mechanics (2007)
    Externer Link:Link
  • A note on the principle of maximum dissipation rate (Artikel)
    Fischer, F.D. and Svoboda, J.
    Journal of Applied Mechanics (2007)
    Externer Link:Link
  • Hindered crack propagation in materials with periodically varying young's modulus - Lessons from biological materials (Artikel)
    Fratzl, P. and Gupta, H.S. and Fischer, F.D. and Kolednik, O.
    Advanced Materials Research (2007)
    Externer Link:Link
  • Kinetics of the austenite-to-ferrite phase transformation - From the intrinsic to an effective interface mobility (Artikel)
    Gamsjäger, E.
    Materials Science Forum (2007)
    Externer Link:Link
  • A note on the contact conditions at migrating interfaces (Artikel)
    Gamsjäger, E.
    Acta Materialia (2007)
    Externer Link:Link
  • Kinetics of solute driven melting and solidification (Artikel)
    Gamsjäger, E. and Svoboda, J. and Fischer, F.D. and Rettenmayr, M.
    Acta Materialia (2007)
    Externer Link:Link
  • Thermal stability of nanocomposite CrC/a-C:H thin films (Artikel)
    Gassner, G. and Mayrhofer, P.H. and Patscheider, J. and Mitterer, C.
    Thin Solid Films (2007)
    Externer Link:Link
  • Tribological properties of nanocomposite CrCx/a-C:H thin films (Artikel)
    Gassner, G. and Patscheider, J. and Mayrhofer, P.H. and Sturm, S. and Scheu, C. and Mitterer, C.
    Tribology Letters (2007)
    Externer Link:Link
  • Thermal diffusivity of the aluminum alloy Al-17Si-4Cu (A390) in the solid and liquid states (Artikel)
    Kaschnitz, E. and Ebner, R.
    International Journal of Thermophysics (2007)
    Externer Link:Link
  • FIB damage of Cu and possible consequences for miniaturized mechanical tests (Artikel)
    Kiener, D. and Motz, C. and Rester, M. and Jenko, M. and Dehm, G.
    Materials Science and Engineering: A (2007)
    Externer Link:Link
  • Influence of external and internal length scale on the flow stress of copper (Artikel)
    Kiener, D. and Rester, M. and Scheriau, S. and Yang, B. and Pippan, R. and Dehm, G.
    International Journal of Materials Research (2007)
    Externer Link:Link
  • On the potential for improving equilibrium thermodynamic databases with kinetic simulations (Artikel)
    Kozeschnik, E. and Holzer, I. and Sonderegger, B.
    Journal of Phase Equilibria and Diffusion (2007)
    Externer Link:Link
62 63 64 65 66 67 68 69 70 71 72