Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Application of material forces to fracture of inhomogeneous materials: Illustrative examples (Artikel)
    Fischer, F.D. and Predan, J. and Kolednik, O. and Simha, N.K.
    Archive of Applied Mechanics (2007)
    Externer Link:Link
  • A note on the principle of maximum dissipation rate (Artikel)
    Fischer, F.D. and Svoboda, J.
    Journal of Applied Mechanics (2007)
    Externer Link:Link
  • Interaction of recrystallization and precipitation during hot forming of Alloy 80A (Artikel)
    Sommitsch, C. and Pölt, P. and Rüf, G. and Mitsche, S. and Albu, M.
    Materials Science Forum (2007)
    Externer Link:Link
  • Hindered crack propagation in materials with periodically varying young's modulus - Lessons from biological materials (Artikel)
    Fratzl, P. and Gupta, H.S. and Fischer, F.D. and Kolednik, O.
    Advanced Materials Research (2007)
    Externer Link:Link
  • Kinetics of the austenite-to-ferrite phase transformation - From the intrinsic to an effective interface mobility (Artikel)
    Gamsjäger, E.
    Materials Science Forum (2007)
    Externer Link:Link
  • A note on the contact conditions at migrating interfaces (Artikel)
    Gamsjäger, E.
    Acta Materialia (2007)
    Externer Link:Link
  • Kinetics of solute driven melting and solidification (Artikel)
    Gamsjäger, E. and Svoboda, J. and Fischer, F.D. and Rettenmayr, M.
    Acta Materialia (2007)
    Externer Link:Link
  • Thermal stability of nanocomposite CrC/a-C:H thin films (Artikel)
    Gassner, G. and Mayrhofer, P.H. and Patscheider, J. and Mitterer, C.
    Thin Solid Films (2007)
    Externer Link:Link
  • Tribological properties of nanocomposite CrCx/a-C:H thin films (Artikel)
    Gassner, G. and Patscheider, J. and Mayrhofer, P.H. and Sturm, S. and Scheu, C. and Mitterer, C.
    Tribology Letters (2007)
    Externer Link:Link
  • A new approach to modelling of non-steady grain growth (Artikel)
    Svoboda, J. and Fischer, F.D.
    Acta Materialia (2007)
    Externer Link:Link
  • Thermal diffusivity of the aluminum alloy Al-17Si-4Cu (A390) in the solid and liquid states (Artikel)
    Kaschnitz, E. and Ebner, R.
    International Journal of Thermophysics (2007)
    Externer Link:Link
  • FIB damage of Cu and possible consequences for miniaturized mechanical tests (Artikel)
    Kiener, D. and Motz, C. and Rester, M. and Jenko, M. and Dehm, G.
    Materials Science and Engineering: A (2007)
    Externer Link:Link
  • Influence of external and internal length scale on the flow stress of copper (Artikel)
    Kiener, D. and Rester, M. and Scheriau, S. and Yang, B. and Pippan, R. and Dehm, G.
    International Journal of Materials Research (2007)
    Externer Link:Link
  • Single-crystal growth of NaCl-structure Al-Cr-N thin films on MgO(0 0 1) by magnetron sputter epitaxy (Artikel)
    Willmann, H. and Beckers, H. and Giuliani, F. and Birch, J. and Mayrhofer, P.H. and Mitterer, C. and Hultman, L.
    Scripta Materialia (2007)
    Externer Link:Link
  • Thermal stability and age hardening of supersaturated AlCrN hard coatings (Artikel)
    Willmann, H. and Mayrhofer, P.H. and Hultman, L. and Mitterer, C.
    International Heat Treatment and Surface Engineering (2007)
    Externer Link:Link
  • On the potential for improving equilibrium thermodynamic databases with kinetic simulations (Artikel)
    Kozeschnik, E. and Holzer, I. and Sonderegger, B.
    Journal of Phase Equilibria and Diffusion (2007)
    Externer Link:Link
  • Computer simulation of the precipitate evolution during industrial heat treatment of complex alloys (Artikel)
    Kozeschnik, E. and Sonderegger, B. and Holzer, I. and Rajek, J. and Cerjak, H.
    Materials Science Forum (2007)
    Externer Link:Link
  • Industrially-scaled room-temperature pulsed laser deposition of Ti-TiN multilayer coatings (Artikel)
    Lackner, J.M.
    Journal of Physics (2007)
    Externer Link:Link
  • Precipitation behaviour of a complex steel (Artikel)
    Leitner, H. and Bischof, M. and Clemens, H. and Erlach, S. and Sonderegger, B. and Kozeschnik, E. and Svoboda, J. and Fischer, F.D.
    Advanced Engineering Materials (2006)
    Externer Link:Link
  • Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD) (Artikel)
    Major, L. and Morgiel, J. and Major, B. and Lackner, L.M. and Waldhauser, W. and Ebner, R. and Nistor, L. and Van Tendeloo, G.
    Surface and Coatings Technology (2006)
    Externer Link:Link
72 73 74 75 76 77 78 79 80 81 82