Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Relaxation of a precipitate misfit stress state by creep in the matrix (Artikel)
    Fischer, F.D. and Svoboda, J. and Antretter, T. and Kozeschnik, E.
    International Journal of Plasticity (2015)
    Externer Link:Link
  • Statistical correction for reinserted runouts in fatigue testing (Artikel)
    Gänser, H.P. and Maierhofer, J. and Christiner, T.
    International Journal of Fatigue (2015)
    Externer Link:Link
  • Load history effects on fatigue crack propagation: Its effect on the R-curve for threshold (Artikel)
    Zhou, X. and Hohenwarter, A. and Leitner, T. and Gänser, H.P. and Pippan, R.
    Frattura ed Integrità Strutturale (2015)
    Externer Link:Link
  • Cu diffusion in single-crystal and polycrystalline TiN barrier layers: A high-resolution experimental study supported by first-principles calculations (Artikel)
    Mühlbacher, M. and Bochkarev, A.S. and Mendez Martin, F. and Sartory, B. and Chitu, L. and Popov, M. and Puschnig, P. and Spitaler, J. and Ding, H. and Schalk, N. and Lu, J. and Hultman, L. and Mitterer, C.
    Journal of Applied Physics (2015)
    Externer Link:Link
  • The roles of Eu during the growth of eutectic Si in Al-Si alloys (Artikel)
    Li, J. and Hage, F. and Wießner, M. and Romaner, L. and Scheiber, D. and Sartory, B. and Ramasse, Q. and Schumacher, P.
    Scientific Reports (2015)
    Externer Link:Link
  • Effects of the comined and cryogenic treatment on the stability of austenite in a high Co-Ni steel (Artikel)
    Gruber, M. and Ploberger, S. and Ressel, G. and Wießner, M. and Hausbauer, M. and Marsoner, S. and Ebner, R.
    Archives of Metallurgy and Materials (2015)
    Externer Link:Link
  • Influence of heat treatment on the microstructure of a high Co-Ni secondary hardening steel (Artikel)
    Gruber, M. and Ploberger, S. and Wießner, M. and Marsoner, S. and Ebner, R.
    Materials Today: Proceedings (2015)
    Externer Link:Link
  • Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling (Artikel)
    Röhrig, S. and Krautgasser, C. and Bermejo, R. and Jones, J.L. and Supancic, P. and Deluca, M.
    Journal of the European Ceramic Society (2015)
    Externer Link:Link
  • Tailoring ergodicity through selective A-site doping in the Bi1/2Na1/2TiO3–Bi1/2K1/2TiO3 system (Artikel)
    Acosta, M. and and Liu, N. and Deluca, M. and Heidt, S. and Ringl, I. and Dietz, C. and Stark, R.W. and Jo, W.
    Journal of Applied Physics (2015)
    Externer Link:Link
  • Core-shell lead-free piezoelectric ceramics: Current status and advanced characterization of the Bi1/2Na1/2TiO3-SrTiO3 system (Artikel)
    Acosta, M. and Schmitt, A. and Molina-Luna, L. and Scherrer, M.C. and Brilz, M. and Webber, K.G. and Deluca, M. and Kleebe, H.J. and Rödel, J. and Donner, W.
    Journal of the American Ceramic Society (2015)
    Externer Link:Link
  • Unusual structural-disorder stability of mechanochemically derived-Pb(Sc0.5Nb0.5)O3 (Artikel)
    Ursic, H. and Bencan, A. and Drazic, G. and Esteves, G. and Jones, J.L. and Usher, T.M. and Rojac, T. and Drnovsek, S. and Deluca, M. and Jouin, J. and Bobnar, V. and Trefalt, G. and Holc, J. and Malic, B.
    Journal of Materials Chemistry (2015)
    Externer Link:Link
  • Chemical and structural effects on the high-temperature mechanical behavior of (1-x)(Na1/2Bi1/2)TiO3-xBaTiO3 ceramics (Artikel)
    Deluca, M. and Picht, G. and Hoffmann, M.J. and Rechtenbach, A. and Töpfer, J. and Schader, F.H. and Webber, K.G.
    Journal of Applied Physics (2015)
    Externer Link:Link
  • Local distortions in nanostructured ferroelectric ceramics through strain tuning (Artikel)
    Philippot, G. and Albino, M. and Epherre, R. and Chevallier, G. and Beynet, Y. and Maniere, C. and Weibel, A. and Peigney, A. and Deluca, M. and Elissalde, C. and Maglione, M. and Aymonier, C. and Estournes, C.
    Advanced Electronic Materials (2015)
    Externer Link:Link
  • An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting (Artikel)
    Bohacek, J. and Kharicha, A. and Ludwig, A. and Wu, M.
    Applied Mathematics and Computation (2015)
    Externer Link:Link
  • Simulation of micro-crack formation in a magnesia spinel refractory during the production process (Artikel)
    Fasching, C. and Gruber, D. and Harmuth, H.
    Journal of the European Ceramic Society (2015)
    Externer Link:Link
  • Young's modulus and Poisson's ratio characterization of tungsten thin films via laser ultrasound (Artikel)
    Grünwald, E. and Nuster, R. and Treml, R. and Kiener, D. and Paltauf, G. and Brunner, R.
    Materials Today: Proceedings (2015)
    Externer Link:Link
  • Adhesion energy of printed circuit board materials using four-point-bending validated with finite element simulations (Artikel)
    Schöngrundner, R. and Cordill, M. and Maier, G. and Gänser, H.P.
    Microelectronics Reliability (2015)
    Externer Link:Link
  • Experimental characterization and modelling of triaxial residual stresses in straightened railway rails (Artikel)
    Kaiser, R. and Stefenelli, M. and Hatzenbichler, T. and Antretter, T. and Hofmann, M. and Keckes, J. and Buchmayr, B.
    The Journal of Strain Analysis for Engineering Design (2015)
    Externer Link:Link
  • Damage tolerance of railway axles - The issue of transferability revisited (Artikel)
    Gänser, H.P. and Maierhofer, J. and Tichy, R. and Zivkovic, I. and Pippan, R. and Luke, M. and Varfolomeev, I.
    International Journal of Fatigue (2015)
    Externer Link:Link
  • Characterization of fatigue crack growth with the configurational force concept (Artikel)
    Ochensberger, W.
    Fortschritt-Berichte VDI (2015)
    Externer Link:Link
33 34 35 36 37 38 39 40 41 42 43