Publikationen
- An innovative concept for interstitial diffusion in stressed crystals (Artikel)
J. Svoboda, G. A. Zickler, F. D. Fischer
Int J Solids Struct (2018)
Externer Link:Link - Dependence of fracture strain on flaw size in rail switches - Experiments and theoretical modelling (Artikel)
Stefan Kolitsch, Hans-Peter Gänser, Reinhard Pippan
Engineering Failure Analysis (2018)
Externer Link:Link - Experimental and numerical investigations of the gamma '' and gamma ' precipitation kinetics in Alloy 718 (Artikel)
A. Drexler, B. Oberwinkler, S. Primig, C. Turk, E. Povoden-Karadeniz, A. Heinemann, W. Ecker, M. Stockinger
Materials Science and Engineering A (2018)
Externer Link:Link - In-situ crack propagation measurement of high-strength steels including overload effects (Artikel)
David Simunek, Martin Leitner, Florian Grün
Procedia Engineering (2018)
Externer Link:Link - Remarkable impact of low BiYbO3 doping levels on the local structure and phase transitions of BaTiO3 (Artikel)
Deluca, M. and Al-Jlaihawi, Z. G. and Reichmann, K. and Bell, A.N.T. and Feteira, A.
Journal of Materials Chemistry A (2018)
Externer Link:Link - In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing (Artikel)
M. Alfreider, D. Kozic, O. Kolednik, D. Kiener
Materials & Design (2018)
Externer Link:Link - Structure-property correlations and origin of relaxor behaviour in BaCexTi(1-x)O(3) (Artikel)
Giovanna Canu, Giorgia Confalonieri, Marco Deluca, Lavinia Curecheriu, Maria Teresa Buscaglia, Mihai Asandulesa, Nadejda Horchidan, Monica Dapiaggi, Liliana Mitoseriu, Vincenzo Buscaglia
Acta Materialia (2018)
Externer Link:Link - Prediction of porosity characteristics of aluminium castings based on X-ray CT measurements (Artikel)
Christian Garb, Martin Leitner, Markus Tauscher, Moritz Weidt and Roland Brunner
International Journal of Cast Metals Research (2018)
Externer Link:Link - Cu-SiO2 hybrid bonding simulation including surface roughness and viscoplastic material modeling: A critical comparison of 2D and 3D modeling approach (Artikel)
Thomas Wlanis, René Hammer, Werner Ecker, Sandrine Lhostis, Clément Sart, Sébastien Gallois-Garreignot, Bernhard Rebhan, Günther A. Maier
Microelectronics Reliability (2018)
Externer Link:Link - Impact of thermal atomic displacements on the Curie temperature of 3d transition metals (Artikel)
A. V. Ruban and O. E. Peil
Physical Review B (2018)
Externer Link:Link - Understanding the effect of surface flaws on the strength distribution of brittle single crystals (Artikel)
Gruber M, Leitner A, Kraleva I, Kiener D, Supancic P, Bermejo R.
Journal of the American Ceramic Society (2018)
Externer Link:Link - High-temperature thermophysical properties of gamma- and delta-Mn from first principles (Artikel)
H. Ehteshami and A. V. Ruban
Physical Review Materials (2018)
Externer Link:Link - A microstructural based creep model applied to alloy 718 (Artikel)
Andreas Drexler, Andreas Fischersworring-Bunk, Bernd Oberwinkler, Werner Ecker, Hans-Peter Gänser
International Journal of Plasticity (2018)
Externer Link:Link - Clustering in Age-Hardenable Aluminum Alloys (Artikel)
Dumitraschkewitz P., Gerstl SSA, Stephenson LT, Uggowitzer PJ, Pogatscher S.
Advanced Engineering Materials (2018)
Externer Link:Link - Stress–strain analysis of the antiplane shear problem for an infinite cylindrical inclusion with eigenstrain: an addendum to Arch. Appl. Mech. 2018 (Artikel)
J. Svoboda, G. A. Zickler, F. D. Fischer
Arch Appl Mech (2018)
Externer Link:Link - Deep drawing of press hardening steels (Artikel)
M Tomasch, W Ecker, R Kaiser and T Antretter
Journal of Physics Conference Series (2018)
Externer Link:Link - The cyclic R-curve - Determination, problems, limitations and application (Artikel)
Jürgen Maierhofer, Stefan Kolitsch, Reinhard Pippan, Hans-Peter Gänser, Mauro Madia, Uwe Zerbst
Engineering Fracture Mechanics (2018)
Externer Link:Link - Presentation and Verification of an Electrolytic Etching Technique for the Determination of prior Austenite Grain Boundaries in the Steel PH15-5 (Artikel)
D. Brandl, L. Höfler, M. Stockinger, S. Ploberger, S. Marsoner and G. Ressel
Practical Metallography (2018)
Externer Link:Link - New Cr-Ni-base alloy for high-temperature applications designed on the basis of first-principles calculations (Artikel)
V.I. Razumovskiy, D. Scheiber, I.M. Razumovskii, V.N. Butrim, A.S. Trushnikova, S.B. Varlamova, A.G. Beresnev
Advances in Condensed Matter Physics (2018)
Externer Link:Link - Thermomechanical modelling of a torpedo Car by considering working lining spalling (Artikel)
Jin S., Harmuth H., Gruber D., Buhr A., Sinnema S., Rebouillat L.
Ironmaking and steelmaking (2018)
Externer Link:Link