Publikationen
- Iron-rich talc as air-stable platform for magnetic two-dimensional materials (Artikel)
A. Matković, L. Ludescher O. E. Peil, A. Sharma, K.-P. Gradwohl, M. Kratzer, M. Zimmermann, J. Genser, D. Knez, E. Fisslthaler, C. Gammer, A. Lugstein, R. J. Bakker, L. Romaner, D. R. T. Zahn, F. Hofer, G. Salvan, J. G. Raith, C. Teichert
Nature 2D Materials and Applications (2021)
Externer Link:Link - Tailoring the ferroelectric and magnetic properties of Bi5Ti3FeO15 ceramics by doping with Co and Y (Artikel)
Bobić J., Ilić N., Veerapandiyan V., Petrović M.V., Deluca M., Dzunuzović A., Vukmirović J., Ning K., Reichmann K., Tidrow S.
Solid State Sciences (2021)
Externer Link:Link - Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper (Artikel)
A. Wijaya, B. Eichinger, F.F. Chamasemani, B. Sartory, R. Hammer, V. Maier-Kiener, D. Kiener, M. Mischitz, R. Brunner
Materials & Design (2021)
Externer Link:Link - On segregation in multicomponent alloys: Surface segregation in austenite and FeCrCoNiMn alloys (Artikel)
Ruban A.V.
Computational Materials Science (2021)
Externer Link:Link - Effect of hydrogen on deformation behavior of Alloy 725 revealed by in-situ bi-crystalline micropillar compression test (Artikel)
Lu X., Wang D.
Journal of Materials Science and Technology (2021)
Externer Link:Link - Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength (Artikel)
Zhao M., Schlueter K., Wurmshuber M., Reitgruber M., Kiener D.
Materials and Design (2021)
Externer Link:Link - On the local evaluation of the hydrogen susceptibility of cold-formed and heat treated advanced high strength steel (AHSS) sheets (Artikel)
Drexler A., Bergmann C., Manke G., Kokotin V., Mraczek K., Pohl M., Ecker W.
Materials Science and Engineering A (2021)
Externer Link:Link - Multi-class grain size model for forged alloy 718 aircraft parts (Artikel)
Gruber C., Raninger P., Stockinger M., Bucher C.
Materials Science Forum (2021)
Externer Link:Link - Hydrogen segregation near a crack tip in nickel (Artikel)
A. Drexler, S. He, R. Pippan, L. Romaner, V.I. Razumovskiy, W. Ecker
Scripta Materialia (2021)
Externer Link:Link - Impact of electric field at rough copper lines on failure time due to electrochemical migration in PCBs (Artikel)
Reiss G., Kosednar-Legenstein B., Riedler J., Eßl W.
Microelectronics Reliability (2021)
Externer Link:Link - Inductive Thermography as Non-Destructive Testing for Railway Rails (Artikel)
Tuschl, Christoph; Oswald-Tranta, Beate; Eck, Sven
Applied Sciences (2021)
Externer Link:Link - How the interface type manipulates the thermomechanical response of nanostructured metals: A case study on nickel (Artikel)
Renk O., Maier-Kiener V., Motz C., Eckert J., Kiener D., Pippan R.
Materialia (2021)
Externer Link:Link - A semi-physical α-β model on bainite transformation kinetics and carbon partitioning (Artikel)
Wei W., Retzl P., Kozeschnik E., Erwin Povoden-Karadeniz
Acta Materialia (2021)
Externer Link:Link - In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Artikel)
Burtscher M., Alfreider M., Schmuck K., Clemens H., Mayer S., Kiener D.
Journal of Materials Research (2021)
Externer Link:Link - Ion irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffraction (Artikel)
K. Hlushko, A. Mackova, J. Zalesak, M. Burghammer, A. Davydok, C. Krywka, R. Daniel, J. Keckes, J. Todt
Thin Solid Films (2021)
Externer Link:Link - Mechanical properties of single and polycrystalline α-Al2O3 coatings grown by chemical vapor deposition (Artikel)
Konstantiniuk F., Tkadletz M., Kainz C., Czettl C., Schalk N.
Surface and Coatings Technology (2021)
Externer Link:Link - The worm-LBM, an algorithm for a high number of propagation directions on a lattice Boltzmann grid: The case of phonon transport (Artikel)
Hammer R., Fritz V., Bedoya-Martínez N.
International Journal of Heat and Mass Transfer (2021)
Externer Link:Link - Extracting information from noisy data: strain mapping during dynamic in situ SEM experiments (Artikel)
Alfreider M., Meindlhumer M., Maier-Kiener V., Hohenwarter A., Kiener D.
Journal of Materials Research (2021)
Externer Link:Link - Machine learning assisted calibration of a ductile fracture locus model (Artikel)
Baltic S., Asadzadeh M.Z., Hammer P., Magnien J., Gänser H.-P., Antretter T., Hammer R.
Materials and Design (2021)
Externer Link:Link - In situ investigation of the oxidation behaviour of chemical vapour deposited Zr(C,N) hard coatings using synchrotron x–ray diffraction (Artikel)
Frank F., Tkadletz M., Saringer C., Stark A., Schell N., Deluca M., Czettl C., Schalk N.
Coatings (2021)
Externer Link:Link