Publikationen
- Dynamic nanoindentation testing: is there an influence on a material’s hardness? (Artikel)
A. Leitner, V. Maier-Kiener, D. Kiener
Materials Research Letters (2017)
Externer Link:Link - Phase decomposition of a single-phase AlTiVNb high-entropy alloy after severe plastic deformation and annealing (Artikel)
B. Schuh, B. Völker, V. Maier-Kiener, J. Todt, J. Li, A. Hohenwarter
Advanced Engineering Materials (2017)
Externer Link:Link - Extraction of Flow Behavior and Hall–Petch Parameters Using a Nanoindentation Multiple Sharp Tip Approach (Artikel)
A. Leitner, V. Maier-Kiener, D. Kiener
Advanced Engineering Materials (2017)
Externer Link:Link - Deformation mechanisms during severe plastic deformation of a Cu-Ag composite (Artikel)
K. Kormout, P. Ghosh, V. Maier-Kiener, R. Pippan
Journal of Compounds and Alloys (2017)
Externer Link:Link - Extracting flow curves from nano-sized metal layers in thin film systems (Artikel)
D. Kozic, V. Maier-Kiener, R. Konetschnik, H.-P. Gänser, T. Antretter, R. Brunner, D. Kiener
Scripta Materialia (2017)
Externer Link:Link - Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys (Artikel)
V. Maier-Kiener, B. Schuh, E. George, H. Clemens, A. Hohenwarter
Materials & Design (2017)
Externer Link:Link - Buckle induced delamination techniques to measure the adhesion of metal dielectric interfaces (Artikel)
A. Kleinbichler, J. Zechner, M. Cordill
Microelectronic Engineering (2017)
Externer Link:Link - Finite element modeling of the residual stress evolution in forged and direct-aged Alloy 718 turbine disks during manufacturing and its experimental validation (Artikel)
A. Drexler, W. Ecker, R. Hessert, B. Oberwinkler, H.-P. Gänser, J. Keckes, M. Hofmann, A. Fischersworring-Bunk
AIP Conf. Proc. (2017)
Externer Link:Link - Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates (Artikel)
T. Kaltenbrunner, W. Ecker, T. Antretter, R. Kaiser, E. Parteder, R. Egger
AIP Conf. Proc. (2017)
Externer Link:Link - Finite element shot peening simulation of coated cutting inserts (Artikel)
L. Faksa, W. Daves, W. Ecker, C. Czettl
Shot peening - modeling - PROCEEDINGS (2017)
Externer Link:Link - Microstructural Effects on the Toughness of a High Co–Ni Steel (Artikel)
Gruber M., Ressel G., Ploberger S., Marsoner S., Kolednik O., Ebner R.
Advanced Engineering Materials (2017)
Externer Link:Link - Piezotronic Effect on Electrical Characteristics of Bulk ZnO Varistors (Artikel)
Raidl N., Hofstätter M., Supancic P.
Advanced Engineering Materials (2017)
Externer Link:Link - Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited – Part II: Thermokinetic Simulation (Artikel)
Stechauner G., Primig S., Kozeschnik E.
Steel Research International (2017)
Externer Link:Link - Investigation of the Gas-Jet Wiping Process − Two-Phase Large Eddy Simulations Elucidate Impingement Dynamics and Wave Formation on Zinc Coatings (Artikel)
Pfeiler C., Eßl W., Reiss G., Riener C.K., Angeli G., Kharicha A.
Steel Research International (2017)
Externer Link:Link - Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy (Artikel)
Tian Y., Gorbatov O.I., Borgenstam A., Ruban A.V., Hedström P.
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2017)
Externer Link:Link - Material properties of CMT—metal additive manufactured duplex stainless steel blade-like geometries (Artikel)
Posch G., Chladil K., Chladil H.
Welding in the World (2017)
Externer Link:Link - Experimental and calculation challenges of crack propagation in notches – From initiation to end of lifetime (Artikel)
Kolitsch S., Gänser H.-P., Pippan R.
International Journal of Fatigue (2017)
Externer Link:Link - Deformation mechanisms during severe plastic deformation of a Cu[sbnd]Ag composite (Artikel)
Kormout K.S., Ghosh P., Maier-Kiener V., Pippan R.
Journal of Alloys and Compounds (2017)
Externer Link:Link - Corrigendum to “Donor doping of K0.5Na0.5NbO3 ceramics with strontium and its implications to grain size, phase composition and crystal structure” [J. Eur. Ceram. Soc. 37/5 (2017) 2073–2082] (S0955221916307063)(10.1016/j.jeurceramsoc.2016.12.053)) (Artikel)
Hreščak J., Dražić G., Deluca M., Arčon I., Kodre A., Dapiaggi M., Rojac T., Malič B., Bencan A.
Journal of the European Ceramic Society (2017)
Externer Link:Link - Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT) (Artikel)
Strobl S., Lube T., Supancic P., Schöppl O., Danzer R.
Journal of the European Ceramic Society (2017)
Externer Link:Link