Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • X-ray computed tomography for fast and non-destructive multiple pearl inspection (Artikel)
    Rosc, J.; Hammer, V.M.F. & Brunner, R.
    Case Studies in Nondestructive Testing and Evaluation (2016)
    Externer Link:Link
  • Thermal vacancies in random alloys in the single-site mean-field approximation (Artikel)
    Ruban, A.V.
    Physical Review B (2016)
    Externer Link:Link
  • Ab-initio search for cohesion-enhancing solute elements at grain boundaries in molybdenum and tungsten (Artikel)
    Scheiber, D.; Pippan, R.; Puschnig, P.; Ruban, A. & Romaner, L.
    International Journal of Refractory Metals and Hard Materials (2016)
    Externer Link:Link
  • Combinatorial refinement of thin-film microstructure, properties and process conditions: iterative nanoscale search for self-assembled TiAlN nanolamellae (Artikel)
    Zalesak, J. and Todt, J. and Pitonak, R. and Köpf, A. and Weißenbacher, R. and Sartory, B. and Burghammer, M. and Daniel, R. and Keckes, J.
    Journal of Applied Crystallography (2016)
    Externer Link:Link
  • Deformation in the g-Mg17Al12 phase at 25-278 °C (Artikel)
    Mathur, H.N. and Maier-Kiener, V. and Korte-Kerzel, S.
    Acta Materialia (2016)
    Externer Link:Link
  • Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars (Artikel)
    Fritz, R. and Maier-Kiener, V. and Lutz, D. and Kiener, D.
    Materials Science and Engineering: A (2016)
    Externer Link:Link
  • Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses (Artikel)
    Krautgasser, C. and Danzer, R. and Deluca, M. and Supancic, P. and Aldrian, F. and Bermejo, R.
    Journal of the European Ceramic Society (2016)
    Externer Link:Link
  • A finite element model to simulate the physical mechanisms of wear and crack initiation in wheel/rail contacts (Artikel)
    Daves, W. and Kubin, W. and Scheriau, S. and Pletz, M.
    Wear (2016)
    Externer Link:Link
  • Buckle induced delamination techniques to measure the adhesion of metal dielectric interfaces (Artikel)
    Kleinbichler, A. and Zechner, J. and Cordill, M.
    Microelectronic Engineering (2016)
    Externer Link:Link
  • Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures (Artikel)
    Leitner, A. and Maier-Kiener, V. and Jeong, J. and Abad, M. and Hoseman, P. and Oh, S. and Kiener, D.
    Acta Materialia (2016)
    Externer Link:Link
  • On the modelling of microsegregation in steels involving thermodynamic databases (Artikel)
    You, D. and Bernhard, C. and Michelic, S. and Wieser, G. and Presoly, P.
    Materials Science and Engineering (2016)
    Externer Link:Link
  • Pore Shape and Sorption Behaviour in Mesoporous Ordered Silica Films (Artikel)
    Popovski, G. and Morak, R. and Sharifi, P. and Amenitsch, H. and Paris, O.
    Journal of Applied Crystallography (2016)
  • Extraction of Flow Behavior and Hall-Petch Parameters Using a Nanoindentation Multiple Sharp Tip Approach (Artikel)
    Leitner, A. and Maier-Kiener, V. and Kiener, D.
    Advanced Engineering Materials (2016)
    Externer Link:Link
  • Curvature determination of embedded silicon chips by in-situ rocking curve X-ray diffraction measurements at elevated temperatures (Artikel)
    Angerer, P. and Schöngrundner, R. and Wießner, M. and Macurova, K. and Keckes, J.
    Powder Diffraction Journal (2016)
    Externer Link:Link
  • Cracks Loaded by Rolling Contact – Influence of Plasticity around the Crack (Artikel)
    Daves, W. and Kracalik, M.
    Materials Structure \& Micromechanics of Fracture VIII (2016)
    Externer Link:Link
  • Experimentelle und numerische Untersuchung des induktiven Anlassens eines Vergütungsstahles (Artikel)
    Vieweg, A. and Raninger, P. and Ressel, G. and Prevedel, S. and Marsoner, S. and Ebner, R .
    Instrumentation and Measurement Technology Conference Proceedings (I2MTC), 2016 IEEE International (2016)
  • Integrated experimental and computational approach for residual stress investigation near through-silicon vias (Artikel)
    Deluca, M. and Hammer, R. and Keckes, J. and Kraft, J. and Schrank, F. and Todt, J. and Robach, O. and Micha, J.-S. and Defregger, S.
    Journal of Applied Physics (2016)
    Externer Link:Link
  • Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures (Artikel)
    Leitner, A. and Maier-Kiener, V. and Jeong, J. and Abad, M.D. and Hosemann, P. and Oh, S.H. and Kiener, D.
    Acta Materialia (2016)
    Externer Link:Link
  • Modified Kitagawa-Takahashi diagram accounting for finite notch depths (Artikel)
    Maierhofer, J. and Gänser, H.P. and Pippan, R.
    International Journal of Fatigue (2015)
    Externer Link:Link
  • Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography (Artikel)
    Mühlbacher, M. and Mendez-Martin, F. and Sartory, B. and Schalk, N. and Keckes, J. and Lu, J. and Hultman, L. and Mitterer, C.
    Thin Solid Films (2015)
    Externer Link:Link
2 3 4 5 6 8 9 10 11 12