Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Extraction of Flow Behavior and Hall–Petch Parameters Using a Nanoindentation Multiple Sharp Tip Approach (Artikel)
    Leitner, A. and Maier-Kiener, V. and Kiener, D.
    Advanced Engineering Materials (2017)
    Externer Link:Link
  • Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures (Artikel)
    Fritz, R. and Wilmer, D. and Leitner A. and Maier-Kiener, V. and Kiener D.
    Acta Materialia (2017)
    Externer Link:Link
  • Dynamic nanoindentation testing: is there an influence on a material’s hardness? (Artikel)
    Leitner, A. and Maier-Kiener, V. and Kiener, D.
    Materials Research Letters (2017)
    Externer Link:Link
  • Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques (Artikel)
    Vieweg, A. and Povoden-Karadeniz, E. and Ressel, G. and Prevedel, P. and Wojcik, T. and Mendez Martin, F. and Stark, A and Keckes, J. and Kozeschnik, E.
    Materials and Design (2017)
    Externer Link:Link
  • Thermal expansion coefficient of WRe alloys from first principles (Artikel)
    Dengg, T. and Razumovskiy, V.I. and Romaner, L. and Kresse, G. and Puschnig, P. and Spitaler, J.
    PHYSICAL REVIEW B (2017)
    Externer Link:Link
  • Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model (Artikel)
    Dai, Y. and Gruber, D. and Jin, S. and Harmuth, H.
    Engineering Fracture Mechanics (2017)
    Externer Link:Link
  • Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation (Artikel)
    Dai, Y. and Gruber, D. and Harmuth, H.
    Journal of the European Ceramic Society (2017)
    Externer Link:Link
  • Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness (Artikel)
    Dai, Y. and Gruber, D. and Harmuth, H.
    Journal of the European Ceramic Society (2017)
    Externer Link:Link
  • Simulation of Acoustic Wave Propagation in Aluminium Coatings for Material Characterization (Artikel)
    Grünwald, E. and Hammer, R. and Nuster, R. and Wieser, P.A. and Hinderer, M. and Wiesler, I. and Zelsacher, R. and Ehmann, M. and Brunner, R.
    coatings (2017)
    Externer Link:Link
  • Accretion Detection via Scanning Acoustic Microscopy in Microelectronic Components - Considering Symmetry Breaking Effects (Artikel)
    Grünwald, E. and Hammer, R. and Rosc, J. and Sartory, B. and Brunner, R.
    Microscopy and Microanalysis (2017)
    Externer Link:Link
  • Effect of a Number of Transition Metals on the Cohesive Properties of Cr-Ni-Base Alloys (Artikel)
    Butrim, V.N. and Razumovskiy, V.I. and Beresnev, A.G. and Trushnikova, A.S. and Razumovskii, I.M.
    Materials Science Forum (2017)
    Externer Link:Link
  • Modeling Inclusion Formation during Solidification of Steel: A Review (Artikel)
    You, D. and Michelic, S. and Presoly, P. and Liu, J. and Bernhard, C.
    Metals (2017)
    Externer Link:Link
  • Investigation of the Gas-Jet Wiping Process - Two-Phase Large Eddy Simulations ElucidateImpingement Dynamics and Wave Formation on Zinc Coatings (Artikel)
    Pfeiler, C. and Eßl, W. and Reiss, G. and Riener, C. and Angeli, G. and Kharicha, A.
    Steel Research International (2017)
    Externer Link:Link
  • Micro-Mechanical In Situ Measurements in Thin Film Systems Regarding the Determination of Residual Stress, Fracture Properties and Interface Toughness (Artikel)
    Konetschnik, R. and Kiener, D. and Kosic, D. and Gänser, H.-P. and Brunner, R.
    Microscopy and Microanalysis (2017)
    Externer Link:Link
  • 3D Microanalysis of Porous Copper Using FIB-Tomography in Combination with X-ray Computed Tomography (Artikel)
    Wijaya, A. and Eichinger, B. and Rosc, J. and Sartory, B. and Mischitz, M. and Brunner, R.
    Microscopy and Microanalysis (2017)
    Externer Link:Link
  • 3D Characterization of Silicon Based Electrode Material for Advanced Lithium-Ion Storage Technologies (Artikel)
    Vorauer, T. and Rosc, J. and Jouneau, P.H. and Bayle-Guillemaud, P. and Fuchsbichler, B. and Koller, S. and Brunner, R.
    Microscopy and Microanalysis (2017)
    Externer Link:Link
  • Selective interface toughness measurements of layered thin films (Artikel)
    Konetschnik, R. and Daniel, R. and Brunner, R. and Kiener, D.
    AIP ADVANCES (2017)
    Externer Link:Link
  • A Novel Two-Disc Machine for High Precision Friction Assessment (Artikel)
    Moder, J. and Grün, F. and Stoschka, M. and Godor, I.
    Advances in Tribology (2017)
    Externer Link:Link
  • Expansion of the Metrological Visualization Capability by the Implementation of Acoustic Emission Analysis (Artikel)
    Bergmann, P. and Grün, F. and Summer, F. and Godor, I. and Stadler, G.
    Advances in Tribology (2017)
    Externer Link:Link
  • Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys (Artikel)
    Presoly, P. and Bernhard, C.
    Iron & steel technology (2017)
    Externer Link:Link
1 2 4 5 6 7 8 9 10 11