Publications




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Influence of the material inhomogeneity effect on the crack growth behavior in fiber and particle reinforced composites (Artikel)
    Otmar Kolednik, Jozef Predan
    Engineering Fracture Mechanics (2022)
    Externer Link:Link
  • Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags (Artikel)
    Jerónimo Guarco, Harald Harmuth, Sandra Vollmann
    International Journal of Heat and Mass Transfer (2022)
    Externer Link:Link
  • Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thickness (Artikel)
    Florian Frank, Christina Kainz, Michael Tkadletz, Christoph Czettl, Markus Pohler, Nina Schalk
    Surface and Coatings Technology (2022)
    Externer Link:Link
  • Ab initio surface free energies of tungsten with full account of thermal excitations (Artikel)
    Forslund, Axel and Ruban, Andrei
    Phys. Rev. B (2022)
    Externer Link:Link
  • Thermally modulated CMOS compatible particle sensor for air quality monitoring (Artikel)
    Jan Peter Specht, Siavash Esfahan, Yuxin Xing, Anton Köck, Marina Cole, Julian William Gardner
    IEEE Transactions on Instrumentation and Measurement (2022)
    Externer Link:Link
  • Coherency strengthening of oblate precipitates extended in the {100} plane of fcc crystals (Artikel)
    M. R. Ahmadi, B. Sonderegger, E. Povoden-Karadeniz, A. Falahati, S. D. Yadav, C. Sommitsch, E. Kozeschnik
    Materialia (2022)
    Externer Link:Link
  • Defect initiation and accumulation kinetics in hard-coated WC-Co hardmetal under multi-axial loads at elevated temperature in a novel ball-in-cone test setup (Artikel)
    Lukas Walch, Thomas Klünsner, Martin Krobath, Kathrin Maier, Werner Ecker, Philip Pichler, Christoph Czettl, Reinhold Ebner
    International Journal of Refractory Metals and Hard Materials (2022)
    Externer Link:Link
  • Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper (Artikel)
    A. Wijaya, B. Eichinger, F.F. Chamasemani, B. Sartory, R. Hammer, V. Maier-Kiener, D. Kiener, M. Mischitz, R. Brunner
    Materials & Design (2021)
    Externer Link:Link
  • On segregation in multicomponent alloys: Surface segregation in austenite and FeCrCoNiMn alloys (Artikel)
    Ruban A.V.
    Computational Materials Science (2021)
    Externer Link:Link
  • Effect of hydrogen on deformation behavior of Alloy 725 revealed by in-situ bi-crystalline micropillar compression test (Artikel)
    Lu X., Wang D.
    Journal of Materials Science and Technology (2021)
    Externer Link:Link
  • Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength (Artikel)
    Zhao M., Schlueter K., Wurmshuber M., Reitgruber M., Kiener D.
    Materials and Design (2021)
    Externer Link:Link
  • On the local evaluation of the hydrogen susceptibility of cold-formed and heat treated advanced high strength steel (AHSS) sheets (Artikel)
    Drexler A., Bergmann C., Manke G., Kokotin V., Mraczek K., Pohl M., Ecker W.
    Materials Science and Engineering A (2021)
    Externer Link:Link
  • Multi-class grain size model for forged alloy 718 aircraft parts (Artikel)
    Gruber C., Raninger P., Stockinger M., Bucher C.
    Materials Science Forum (2021)
    Externer Link:Link
  • Hydrogen segregation near a crack tip in nickel (Artikel)
    A. Drexler, S. He, R. Pippan, L. Romaner, V.I. Razumovskiy, W. Ecker
    Scripta Materialia (2021)
    Externer Link:Link
  • Impact of electric field at rough copper lines on failure time due to electrochemical migration in PCBs (Artikel)
    Reiss G., Kosednar-Legenstein B., Riedler J., Eßl W.
    Microelectronics Reliability (2021)
    Externer Link:Link
  • Inductive Thermography as Non-Destructive Testing for Railway Rails (Artikel)
    Tuschl, Christoph; Oswald-Tranta, Beate; Eck, Sven
    Applied Sciences (2021)
    Externer Link:Link
  • How the interface type manipulates the thermomechanical response of nanostructured metals: A case study on nickel (Artikel)
    Renk O., Maier-Kiener V., Motz C., Eckert J., Kiener D., Pippan R.
    Materialia (2021)
    Externer Link:Link
  • A semi-physical α-β model on bainite transformation kinetics and carbon partitioning (Artikel)
    Wei W., Retzl P., Kozeschnik E., Erwin Povoden-Karadeniz
    Acta Materialia (2021)
    Externer Link:Link
  • In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Artikel)
    Burtscher M., Alfreider M., Schmuck K., Clemens H., Mayer S., Kiener D.
    Journal of Materials Research (2021)
    Externer Link:Link
  • Ion irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffraction (Artikel)
    K. Hlushko, A. Mackova, J. Zalesak, M. Burghammer, A. Davydok, C. Krywka, R. Daniel, J. Keckes, J. Todt
    Thin Solid Films (2021)
    Externer Link:Link
2 3 4 5 6 7 8 9 10 11